I have a canon C5840i that I want to force secure print.
Please assist with instructions and driver config tool to achieve this.
Thank you again
Type: Posts; User: xman
I have a canon C5840i that I want to force secure print.
Please assist with instructions and driver config tool to achieve this.
Thank you again
Hi there,
Can someone please post a link to download the latest version of the Canon Driver Configuration Tool
Thank you
Please help with resetting the service mode code.
I have a client with a 360i, previouse service company has changed the code.
What is the procedure to reset or change the service mode code please.
Hi there,
I have a client with an Estudio 2555c with a failed hard drive.
any assistance to get a replacement with firmare will be appreciated.
Hi there,
Kyocera 3252ci
I have an issue with the horizontal stripes (Barber polling) on black prints - Replaced the black dev and now working ok. But after reading some of the posts I fear the...
Hi there,
Can someone please send me - Kyocera M6230cidn Service and parts manual.
Thank you
Hi there,
Kyocera 3252ci
I have an issue with the horizontal stripes (Barber polling) on black prints - Replaced the black dev and now working ok. But after reading some of the posts I fear the...
Hi there,
I too have the same issue with the horizontal stripes (Barber polling) on black prints - Replaced the black dev and not working ok. But after reading some of the posts I fear the issue may...
Thank you
Hi there,
Can someone please send me a parts manual for the Ricoh Aficio MPC3300.
Thank you in advance
I too am having the same issue with skewing.
I initially thought it was only from the bypass tray as the client was only using card stock from the bypass and it was very noticable. Not as noticable...
I have just purchased an off the shelf HDD from the local computer shop. Havent ordered a formatter board yet. Just thought I would replace the hdd first.
Do you see any issues in doing so ?
Thanks MBT, maybe I should have explained more.
Once the HDD is replaced, does it required a firmware upload or will The T610 just work with a fresh blank HDD.
Hi everyone,
Does anybody have a procedure to replace the HDD on a HP DesignJet T610 (Q6712A
Can anyone post a link for the Kyocera TaskAlfa 4500i Service Manual.
Thank you
Does it feed via the bypass tray ?
Can anyone please supply a service manual for the Fuji Xerox DCC320 copier.
Hello all,
I have a client with a dcc320 with repeated marks on the print. opening the side cover I can see part of the image belt with the marks. The belt is ver worn. I believe the ITB p/n is...
Can anyone help with a canon service/parts manual.
Cannot access command centre. I suspect someone has changed the user name and password.
I have tried the default user: admin. Password: admin00 or admin01. But no go.
Can anyone help initialize...
I have a remote client that has just emailed me saying that the machine displayed "Black Toner Empty ". They replaced the black toner and the machine no says " No Toner Black " and " Replace Toner...
I have a remote client that has just emailed me saying that the machine displayed "Black Toner Empty ". They replaced the black toner and the machine no says " No Toner Black " and " Replace Toner...
Thank you. Much appreciated
Not jamming,
The top lid latch hook is broken and I want to order replacement parts.
I need to identify the part and then part number.
Can you help
Thanks
Thanks for the reply arn79. Have already checked the basics. I suspect an intermittant driver problem. Will look closer into it. May reinstall drivers.
Have a great week.