Search:

i have a whole "1" and i wanna see who gave it to me

pos or neg rep power

i still dont see where to go to see who gave you what. maybe not enough coffee yet

i got called out at 3am for a paper width error on one of our large continuous feed production printers. called and asked if he had cleaned the sensor "yup, cleaned it twice!". after a 45 minute...

when swapping boards mark the original with a sharpie. also mark unused connectors with a red sharpie. rainex winshield washer fluid works great on copier class. can usually get it for 99cents a...

do they have insurance? lighter fluid and a match will definately fix the problem

long shot, but.... there is a report where cust had a virus on the network. tech unplugged the network cable and was able to print.

i found these, they might help:
1. Disconnect the encoder...

that could be the spice board, LVPS, or printhead interface board.

there was also a report of dev dumping due to a frayed wired from the hvps

i am usually at my first call or the office at 8am. when i was in our other division (i now do production printing) i covered a school system years ago and i would be in at 7-7:30 (before the moron...

dev dumping could be the hvps. the cleaning and bias voltages will fluctuate

is the print problem only when you hit demo print?

i replied as well and havent heard anything either

welcome and good luck!

i got that too!

new here. just found out about this site in my last training class. worked for pitney bowes/imagistics/oce for over 13yrs. I'll help you as much as i can, well at least as much as i can so i dont...

laser code for the polygon motor

jeff is completely right. there is not a paper manual. all lotus.

04537 is scan lamp adj out of range. check to make sure nothing in the scanner got bumped out of place

i celebrated by being on call all weekend. yuck!