Hi,
I have this Versafire CV with old version 17, and have to reinstall but i don’t have the VM installer for standalone version 2017 anymore.
Does anybody have the files somewhere uploaded.
...
Type: Posts; User: bojans
Hi,
I have this Versafire CV with old version 17, and have to reinstall but i don’t have the VM installer for standalone version 2017 anymore.
Does anybody have the files somewhere uploaded.
...
usually the problem is in the toner pump. the pump tries to suck the toner a couple of times and if it fails it kills the chip. it is necessary to inspect the pipes and change the pump. there is also...
Hello,
Does anyone have System software for Fiery eb 22 for Ricoh pro c 5100. I had usb with software but its not working anymore.
My problems with server, are:
Cant access via web,
Printing fine...
Did you try to format hdd in sp mode?
Thought it would be potential sensor.
You will have to change it.
You can use one from 7100 until you fix it (if you dont have spare parts)
Its a bit tricky, but you can change it only by...
In his profile, there is info that he was trained on this model.
Did you check SC history? Which error code is there?
You have provided too little info, and Im not sure what you're asking for.
Did you connect Prinect DFE and Ricoh machine with crossover cable? What do you see on Ricoh display and on the monitor...
Manage to fix it.
After couple restarts and procon's I got error 22 in sp 3012 ID sensor problem.
Had to open a bit ID sensor to blow toner or dust from it.
Now its working.
It doesnt boot when unplugged.. sc9xx
From my experience, when hdd is problem, machine will be ready, will receive job, and will only blinking blue light, but will not print.
I have formatted Hdds first, didnt change it. But, i have realised that fuser didnt reach temperature, fuser lamps goes off as soon as self checking starts. I believe when Hdds are bad, machine reach...
Nothing in SC history.
Just been reading service training material and found that there are some IC sensors for fuser. I was blowing air inside the machine. Maybe there could be a problem.
Hi,
I have this pro 8110, after changing developer printed 100 pages then turned off machine to put back plastic parts.
After power on, it starts self checking, starts to light on lamps in fuser,...
First you should do ProCon and check for the errors. I also believe its a potential sensor. If you have skills and not too big hands, its possible to change it when you pull out PCDU.
Ok, no problem.
Thanks anyway.
Hope someone else will help.
I have one in my office for one month. It was full of toner, we use it for printing couple of Invoices every day, and it has eaten...
Hi slimslob,
Could you explain what should be set to make machine use less toners.
Thx
He had to apply the patch or install new toner (or toner chip).
Check your PM.
If you have first replaced toner pump and then toner cartridge you should have working machine.
I never had any other problem with toner supply, but toner pump and bad chip.
When you install new toner, does machine start to rotate toner and do you hear the sound from toner pump?
Are you sure your toner pump is working?
Its usually toner pump, D0743551
or clogged hose.
If you have faulty toner pump, machine will try to add toner couple times and the will "kill" toner crum chip, and will not add toner to hoper....
Hi,
I had a lot of Pro C 751 and now 7100.
For me the best machines ever. My customers printing 1to 1.5 millions of copies per year.
If you change parts due to PM you will have very little...
I'm in Bosnia and Herzegovina, and shipment to India would be very high price.
How much are you willing to pay and how to ship?
Where are you from? I have one unit.
Yes that motor. Not the one that drives the toner pump.
51994