Hy, has anyone manage to install drivers for Xerox C550/560 Integrated Fiery on newer Mac OS system 12-13. Latest driver are for Mac OS 10.11 El Capitan and I'm getting "Filter fail" error while...
Type: Posts; User: Ignis
Hy, has anyone manage to install drivers for Xerox C550/560 Integrated Fiery on newer Mac OS system 12-13. Latest driver are for Mac OS 10.11 El Capitan and I'm getting "Filter fail" error while...
Hy, can you please share with me some knowledge with Freeflow RIP connected to DC8000AP
Problem begin with occasional failure from DFE to recognize printer trays. So i have to reboot printer and...
Hi there. Does anybody have Xerox PWS release 9 or higher CD? CD ISO name is (701P47563)
Need it for DC8000AP. I have Edocs for it, but missing PWS. Thanks
Hy, I have same problem with me 2060. At firs it start jamming every cca. 10 prints, now it wont print any A3 or SRA3 from tray 2/3. A4 paper prints just fine without jamming. I have PWS. Have you...
Thanks, it works! solved :cool:
Gear that drives 2BTR in paper transport modul? so that there is no own transmission?
Hy, I have some nice problem, for me is hard but i believe for you is light one! :D
when printing on any size of paper between 80-130 gr. uncoated weight paper I get this smudged print.
On...
Hy, I have some nice problem, for me is hard but i believe for you is light one! :D
when printing on any size of paper between 80-130 gr. uncoated weight paper I get this smudged print.
On...
I didn't know that before two weeks, and put 1xCMY 3535 toner in my 2060 machine!
Yellow and Cyan dev Unit losses developer from magnetic roll almost completely and toner powder was..everywhere..on...
The solution of this problem is that I replaced Heat roller. The problem was the new hot roller (dc12) that was not an original for the 2060 machine. I have advice from servicer to put hot roller of...
Yes, I changed complete Belt Assembly with new one, it was already lubricated inside and outside.
Maybe that PWB is wrong, Are thouse PWB at the back side of the printer?
How do you think there are more error codes? PWS does not show any other error codes, just that one.
It show that some parts are over their life time but it's not too much over.
I check fuser...
I got this error 10-314 (Fuser Belt In Limit Fail) on my DC 2060. It apears after 5-10 prints on any paper. In documentation it says that fuser belt is walking on one side to much or position sensor...
I can't belive that installing Fiery system can be so fu* difficult! As you mentioned Win XP, I have instal it, and Fiery sys software (this time without any error while installing), but after...
I'm trying to install Fiery system software on my RIP (EX2000d) with freshly installed WinNT 4.0 with SP6 and every time I came up with error at the end of setup process. Maybe I'm missing something?...
Hi Gus, I did not solve the problem yet, I'll have to disassemble the fuser and check the thermistors then I'll see how it will work.
So far, every time I turn on the machine I open the main handle...
Hello, I have a problem with tray 3, it pull the paper, but each time gets stuck in the transport part of the drawer and the printer, gets stuck in the same place, the wheels do not pull the paper. I...
yes, the lamps came on, i see them. And when i close the handle i can hear how pressure belt engage every time.
I noticed that this happens mostly when first starting the machine in the morning...
I dont have RAP descriptions for error codes! Where can i get it?
I only know that i need this RAP code 2-294
Thanks
Hi, every time when I'm turning on the machine, after warming up..(4-5 min.) this error appears.. It says turn off the machine and waith 5 sec. then turn it on again! and when i do that..its fine,...
Hey, simple question..are the Fusers of DC 5252 and DC 2060 same? specialy upper heather roller?!
Thx
Hy, I have problem with tray 3 on 2060. I't wont lift the plate with paper! Machine change tray 3 in gray color and says that Tray 3 is faulted (7-283 Tray 3 Broken RAP), Problem appeard in middle of...
Hy, sorry for not answering that long!
Problem with stains on print are because black drum cleaning blade was not functioning right, I had spare complete drum catridge so i replaced it, and now...
I manage to solve this problem, I clean coroton wires and grids with alcohol just the way you describe it.
Grids wear all covered with dust..they wear black..not silver..
and i accidently broke one...
Do I have something special to look when cleaning the coronas?
What is the best way to clean it?