Search:

too late, but thanks anyway. That tab is very sharp............It's nice to get things running and that is what we do.:cool:

Yes, I hear the selenoid. Got it open, your suggestion is dead on. Most likely the switch came loose in transit. Thanks.



[QUOTE=Synthohol;561849]stick your pinky in the hole and lift the tray...

Hi, all HAPPY CINCO........I picked up a used c6500 for parts and when it got to my floor the tray 5 won't open. When I inspected the machine it was fine. Maybe the movers knocked something out but I...

I was having the same issue with the black and I swiped the transfer belt assebmbly with another machine and it was gone. Think it was the cleanup blade on the trans belt.



I

email me the file and I will try on my machine.
impimp329@yahoo.com

I have had similar problems with client supplied pdf's and yes, do not print from jpg. Anything saves as jpg will pixilate fonts. Open file in illustrator and see if there are any colors in that...

Thanks

Yes, it's the 2 ceramic rollers on the exit tray right after the fuser.

Hi, I was changing the paper exit rollers on a c6500 and the springs for the tension popped off. Anyone have a picture of how they go back together????
This is the assembly right after the paper...

Hi all, I have just changes the developer twice on a c6500 and went thru all the settings, and it still prints grey on a sky shot. I have changed the drum and corona and still, nothing. I have also...

Yes, thank's for the help. But for some reason, I can't get the finisher to do any of it's functions. It only allows me to insert from the feeder but won't fold or punch. And it won't give me any...

THANKS!!!!!! .It was the switch that needed to be at 2 position and the tray sensor detector, which once connected, the power was applied.

No, it's a 65ppm machine. The jumper is for a 105ppm and when I reinstalled the fd501 I noticed all the switches were in the off position. Also on the powering of the fd501, it was connected to it's...

Hi, I am at a loss. I recently removed the stitcher/trimmer from a pro c6500 because it was not being used at all. Went thru all the steps and started to install the ru unit along with the fd-501....

Can I install the finisher without the RU unit on a bizhub pro c6500?

MODEL#FD-50133199

Hi, I just removed the saddle stitcher, folder and trimmer from a pro c6500 and I want to keep the inserted and folder. I also removed the decurler. I need the parts numbers for the brackets,...

Anyone have the part numbers for the torque limiter?

Good day all, I cannot seem to figure out why my machine will not feed copies after the paper is about to exit the fuser and go into the decurler. I have tried several paper weights and nothing seems...

Hi, all I have a KM C6500, that won't complete the "please wait, now adjusting". I took the drums, imaging units, coronas out and cleaned everything and it still won't go to READY. Any ideas?????

I tried that and it still has no response. Should I just replace the panel?

I have been running my c6500 without much problems. Friday, the control panel was not responsive to touch. Shut down and unplugged machine. Started back up and no codes but panel is still not...

I just got this machine a couple of weeks ago and it had just been serviced by Konica when it was at the previous owner's shop.
I noticed an error code as I was trying to get a rush job out. Can...

Can you show me what to look for as far as the possible broken pin? I appreciate your responses.

The bars are suppose to be there. The first few manuals were nice and black and as the run continues, the manuals are not the same black density as the first few.
New developer and drum is still...