Search:

I agree!!!! Had the same thing happen to me.

I would check their AC power. Probably power sags. An ESP power filter is a good way to check in real time.

Well I updated the firmware and also replaced the formatter and that seemed to take care of the problem. I went ahead and got a transfer belt just in case. So far so good! Thanks again guys!

Interesting. I'll give that a closer look.

Thanks again and I'll post what I find.

It is plugged directly in the outlet. It's in a production environment, and they do have power issues at times. It's a DVD production and packing facility with lots of automated equipment. In fact,...

Anybody got any ideas?

Sorry I repeated all the images. So what do you think?

7857[att785978607861ach]7858[/attach]

785278537854785578567852

Just got home from copierville. I'll do that tomorrow when I get some time. Thanks for the help.

I could scan them to an e-mail address if you like.

I'll see if I can. Might need help on that too. :)

I have in the field a HP Color LaserJet CM2320MFP and on every print or copy it comes out with a black, cyan, magenta and yellow line on the page. They are 9mm wide and evenly spaced the distance of...

Thank you...I feel honored.

Well, I went and rebuilt it today and it wasn't that bad. I dropped the assembly and disconnected the sensor harness like suggested and it was fine. A little hard working on the feed roller...

I sent you an e-mail and thanks to all that helped me out. Hope I can return the favor.

I am a trained tech but not on Canon equipment. I didn't want to have any surprises when I went to replace the parts. Is it really that difficult? If I do need a manual, where could I find one?...

Hi, I need to replace the Sep roller, feed roller and pad in the ADF in the D860 and have never done it before. Is it a simple job or is it real involved. Any help would be appreciated.

Thank You