This has been an intermittent issue on a new 3 month old new scanner with about 132k scanned images
Color scans leaves a striped greenish blue bars in the image with the same black/gray pattern...
Type: Posts; User: mntech
This has been an intermittent issue on a new 3 month old new scanner with about 132k scanned images
Color scans leaves a striped greenish blue bars in the image with the same black/gray pattern...
Thanks,
I will look into this.
It looks like QA N239 is the bulletin you are referring to.
Thanks for the reply.
Looks like they had moaning / ticking / squeaking noises a couple months ago and the fuser was replaced then. Less then 10k. I didn't see gear dust when I inspected.
I...
Hello,
I have a customer that says the machine makes grinding noises first thing in the morning everyday, but then never does it again throughout the day.
I was thinking fuser, so I had them...
I forgot to mention that it seems to be just 'photos' that are getting stuck. When I tested email, safari, notes the print job worked.
Also different photos or pictures would occasionally work...
Hello,
I have been dealing with a 2554ci where users are having problems printing form their iPhones.
Customer prints a lot of photos from their iPhones of receipts and whatnot, job will get...
I wonder if just removing the "lump breaker spring" would work.
It doesn't rotate, just vibrates.
It seems the thing that was designed to break lumps is causing lumps.
Maybe if the spring...
Awesome!
Thank you for this. I couldn't find any bulletins on the Kyocera US portal.
I just wish they would sell just the modified cleaner unit instead of the entire transfer unit.
Thanks,...
The machines are on MA, so they are using OEM toner.
I haven't worked on too many of these machines, so ill have to research into how the waste system works. I'm not sure if they machine detects...
Has anybody ran across this problem on the Ecosys M5526 series machines, I haven't seen any bulletins, but have had 4 machines do this to me:
Transfer belt cleaning unit is not removing toner and...
Do you know the part number for the 2nd BTR HVPS? My old arse PWS has the BSOD and needs to be re-imaged
I have a J75 that has splotchy white areas in all colors, worse in lighter density
Customer has two of the same machines, so I've already swapped out the primary transfer unit and the 2nd BTR unit...
The original part number off the board and manual was 105e21280
The replacement board part number that I used and was able to find from a vendor is 105E19580, which is identical and is listed for...
Sorry for a late update... Took a while to get the board.
It was the high voltage power supply board CMY that was at fault. Beck ordered for a long time, bit eventually found a vendor who had an...
Case closed
The problem was that I actually have a 700i
And I need a different software for it
I mount the iso as a virtual dvd on the PC
The progress bar on the PC software install never goes past 0% and after 10-15 min says failed
I've also made sure to disable firewall and do not have...
I have a xerox 700 with the integrated fiery E100-05 that wont boot.
I was able to get a a copy of the system software dvd iso image
I put the fiery dip switches to on, hook up a crossover to...
It looks grainy like it's pulling developer on to the page, does it feel grainy? Check to make sure the drum charge roller holders didn't break during shipping. I don't remember, but does that dev...
Ok looks like there is a charge HVPS, PL 11.1 #13 105e21280
I'm going to give that a try, not a dealer and Google isn't giving me any hits on the part number, do I'll have to make some calls to...
So you are saying mcu pwb may not be sending 24v signal? Is there a separate HVPS just for the BCR rollers? I'm leaning towards HVPS being the problem.
I've tried new door switch, swapping the...
I've got a J75 that is printing solid cyan pages, the machine will sometimes run fine then just start printing solid cyan over the image during a job. It actually consumed most of the cyan developer...
Hello tech community,
I have a kyocera 356ci giving me hell. They cyan is very washed out and is causing colors to not look right.
I have replaced the Dev, Drum, Transfer Belt, and Laser Unit...
I ended up just replacing tray 1 feed station, since I had a parts machine to take from. But pretty sure it was just that CPFD1 sensor.
Funny thing is the customer says it has been running fine...
Thanks for all the replies!
I did clean CPFD1 sensor, and would have expected a sensor to be more consistent (jam for me while testing), but I am going to go ahead and replace it.
Both jam codes...
Logs show a number of "TRAY1" jams consecutively, then switches to "CPFD1_N2" jams consecutively as they have removed paper from tray 1 and attempt to use tray 2.
Both trays are 8.5x11 LEF
...