does this program require TSRC account?
Type: Posts; User: hossam
does this program require TSRC account?
toner pumps are interchangeable, ITB units are different 4290142902
What type of paper you are using?
i think it's Fusing problem.
are you kidding? what i'm supposed to say about Egypt?
Hello Everyone,
I am looking for a job as photocopier technician, twelve years experience, specialized in Ricoh family (mono & color),
Sorts of Konica Minolta (mono & color)...
Here Is the PC For Duplex Unit
you need Code generator to change service plan to "C" (Aftermarket -System will accept non-Xerox and OEM suppliedxerographic module with no CRUM) BUT... you still need to install chips, because it...
Hello There, is this job still available?
Thanks.
BTW
i'm just trying to help!
i can't remember it!
maybe it's = blank, right?
you can disable PCU Alarm in service mode
sp 5912-1 0: Not displayed, 1: Displayed
sp 5912-2 Note: The zero setting switches the alarm off.
Login as supervisor and password=password, then Turn off authentication in user tools>system settings>administrator tab
hey there,
i have the same problem, have you found the solution for this problem?
thanks
clean or replace DRUM POTENTIAL SENSOR in Drum unit.
Note: don't use blower to clean it
Hi Everyone,
I'm Familiar With Scan To Folder Procedure in Ricoh Machines (Without Installed Fiery)
This is my first attempt to configure a machine with installed fiery,
In Fiery it shows that SMB...
it was Dial pause, *, #. that sequence...
Thank You Very Much
Hi everyone,
can't enter Diagnostics mod because of touch screen misaligned,
is any way to Calibrate touch screen without entering Diagnostics mod?
Thanks
if it prints fine, i think it's not a toner pump problem, try to replace toner bottle with another new one if it's not recognized, it should be the RFID board.
34380
may you please explain how to do that?
Sent from my GT-I9300 using Tapatalk
Pull out the laser unit, disassemble it, clean inside and mirror, blower it, take out the LD board you will find a sticker covering a lense inside clean it, perform SP 2-109 to adjust the laser...
Have you tried to clear the memory?
Make sure to print out non default programs before memory clear
Sent from my GT-I9300 using Tapatalk
Download network twain driver and install it then try to use "easyscan" program or Microsoft Word to insert pictures you want to scan
Sent from my GT-I9300 using Tapatalk
Looks like magenta and yellow drum unit problem
Sent from my GT-I9300 using Tapatalk
I'm match the job requirements, do you have a visa for Egyptian technician?
Sent from my GT-I9300 using Tapatalk