Search:

Hi All!
First of thank you for looking my thread. :)
So before I tell my problem I must say I'm not really familiar with Ricoh, mechanically not too different and tricky, I 'm rather familiar with...

Hi everyone!
I need a little helping hand as I'm not a Konica tech ( rather a Kyocera or Canon) I've got a problem with a Bizhub C353. Even the e-mail address of the device was set for new one ...

Hi guys!
I've got a Konica M. Magicolor 2480 Mf that doesn't detect the toners at all. It displays yellow...magenta...cyan..black toners not installed. I've looked after and also I'd met with the...

Hi Everyone!
I've got a problem with several printers of SP 3300. Each of the printers make horizontal lines ( just some lines) at the beginning of the paper.
Not vertical cause it would mean the...

Hi Guys!
I've got a problem with an IR1022A . it has been installed on the computer with UFRII and works perfectly as a printer then I tried to install it as a scanner with the IR Toolbox 4.9 of...

Hi Guys!
I've got a problem with a Canon IR2020. It has ttle lines on the image, thought it is the failure of the drum, as its life was 55. Well After I changed for a new drum the lines were still...

Hi everyone!
I need a Canon IR developing assembly the parts number is: FM2-0287-000
I need for a Canon IR 4570 so IR 2270 and IR 2870 and IR 30XX and IR 32XX also would be great. I looking for...

Have you already tried the new hopper replacement? I've got the same problem and saw the bulletin about the error code, so asked for a new hopper in a flashreport. I 'm just curious about how does it...

Hi Everyone!
I've got a problem with a Canon MFC 8180 . It doesn't detect any of the toners. Even the toners in it the printer requires and asks for the toners.
what's the matter ?
It has...

The code is exactly :
E000005-0002

I will post a picture If I got from my partner :)
I swear I'm also courious about the problem cause I still haven't found the problem.

Yes unfortunatelly it hasn't got....so it couldn't reset the counter of it.

What else can be?

Sorry , Yes :(

Hi Guys!
I've got an IR4570 which has a E005-002 service code. I couldn't find it in the service manual, and dunno for what is it. I found the canon use it for cleaning web count Could it be?
Or...

Hi Everyone!
I've got a minolta 1600W colour printer. The problem is : it doesn't detect the black cartridge even if I put in another machine the other detects that the cartridge has still remaining...

thank you, the only thing what I haven't cheked the subject of the mail. I'll change to another. e.g.: Canon Asset company....or something like this.

Hi everyone!
I've got a problem when I want to scan _/send email with an IR1024if. I couldn't send email and I've got a report with a #801 error code. I know what does it mean, the #801 for the SMTP...

the toner is brand new genuie sharp. anyway I'll look after the optics. :) Thank you :)

Thank you !
I've got already the service manual..but as a canon technician I'd prefer those people's advices who usually repair sharps.

Hi Everyone!
I've got a Sharp AR-M155, it has very poor image quality when the prints come out.
the whole page is quite dirty and the image is ghostly..... when I set the contrast lower it is...

Hi Everyone :)
Hope so you can help me.
I've got a problem with a Canon IRc 2380 which has a faulty touchscreen. On the LCD display it has 2-3cm ( 1 inch) wide black strings in the lower part ....

looks nice :)

Hi
I know the reg sensor's problem and it is good no edge on the surface, and the paper feed clutch ( the old bad FK2-1068 always gets rust) is brand new.... :) Also the cassettes's solenoids were...

congratulation and respect :)

Hi Guys!
I tried the Dc panel at another asset and it worked properly.So the DC can't be the foundation of the problem. more inspection was and we saw that on the surface of the drum there isn't a...

Hi!
Give me your mail. I'll send you tonight. ok?
Best regards,
Norbert