Search:

Hi pearl85, Thanks for the advice. We had 2 machines with the same problem. We have changed the BICU and polygon at the same time and it worked, bot machines are fine now.THANKSBalazs

I would like to join and give a short list of parts which are frquently went wrong on them:
this machine was a horrible b*tch from the moment it has rolled down from the factory line.

development...

Here are some tricks we are tried:

Cleaning the mag roller as an obvious.
do an engine memory clear, run the machine for 100 pages, and see if it gets better
if not put a new developer in and...

Hi,
As default the user name is "admin" and the password is blank (no password) this is for changing the settings
or you can log in as supervisor, this is only to change the admin's name and...

this is wide spread problem with a range of machines,
the connector pins on the ribbon cable for the touch panel is getting corroded, and needs to be replaced.
normally it is a warranty issue.

Hi guys,

I have a strange problem on an MPC 3300, it is making multiple copies and prints.
When you press 1 copy it makes 3 or 5 instead, but does it even when you print. the thing is occasional...