Search:

It looks like the sensor pre-triggers the android waking up in the background when someone approaches the machine without switching on the display.
Hard to explain for end user. The machine is ready...

Hi again,

I need to know how to write serial number into machine.

Taaaaddddaaaammmm!!!! Done!!!!


Like you see on screen shot attached the controller version is 2.08N1


That N1 suffix made me suspicious. I tried to update controller firmware via USB and...

Hi,
I have met piece of SP3510SF without colour scanner mode and 200x200 resolution only. I mean that only 200x200 and mono .tif can be selected in the adress book.

Strange for me because every...

Microshit has made some update for 2012 server failing SMB service.
So, they released rollup update repairing they excellent work :)

I have verified usb power supply issue in the MPC2050 and power is permanent even in sleep mode. I use wr-702 and MPC2050 in my company without any problem.

Tp-link wr702n probes network at start. When another dhcp server acts in the network, the wr-702 works as a dhcp client and can be configured under received IP. From copier/printer point of view is...

I find that issue depends on machine type. I am almost sure that bigger machines (I mean medium speed 30-50 copies) have continuous power in the usb port. In the box you should found white in colour...

[stop]107[start]

MP2014 is extremelly cheap and poor looking machine. A lot of wind inside... :)

1. At the moment Ricoh does not publish files for remote update (.rfu) in Europe at all - happily.
2. You have 100% of machine failure after remote update when even unimportant alert (paper end,...

BTW. If your linux server has no GUI and you can operate only via console, the best way to configure CUPS is console (text) web browser (eg W3M or links2).

Example:
user@host:~$ links2...

In fact I am fan of Debian distribution but issue should be the same. You have to use tool called CUPS
Put into your web browser (eg. Firefox) "localhost:631" and then put login and password of user...

In the past there was official bulletin with detailed description how to polish some axises and gears in the ADF to get rid of jams problem

Be carefull with printing costs of SP4510 because drum counter counts in the strange way. For instance when you print single pages the counter clicks a few times but when you make series the counter...

Tp-link tl-wr702n seems better. It looks like box of matches and one can be power suppied from machine usb port. Of course power supply unit and cables you get also in box.

Nano router...

Ricoh wireless option is always expensive piece of sh.t.

Use device called TP-link TL-WR702N. This is ultra small router with client mode for 20 euro only. You can supply one from machine usb...

Look at the silver label with serial number. Tell me what is machine code (eg. D019 or something like that)

When you suffer from continuous address book problem in the MP171 it is too late and you have to update system and use special rescue SD service card.

Problem background is that there was bug in...

Of course when display works. When display is blank and sc204 you can see only via web page, it is necessary to replace mirror motor and main board together. It is possible to repair mainboard...

Forget about language change. That machine is old as carbon and fern taken together. It is necessary to have special sevice PCMCIA card, special Ricoh utility and compatible card reader.
In the...

So, Like we see a few issues concerning transfer unit can make sc204

Hi,
this week I had the same issue.
In my case transfer case was broken. I mean plastic pin fixing case onto right door. Transfer unit was not properly set/fixed
It is necessary to replace case...

The reason is shitty toner pump (pump behind flying wheel). It is necessary to change one quite often.

You have system v1.04. Machine behaviour you have is commonly known issue. Upgrade system onto v1.07. Good habbit is to update every firmware module at once (like I said earlier). Reinit SP5-846-50...

MP161 family has no special and critical settings. The only one important thing (rather less than more) can be registration. So, do not hesitate reset machine.
Remember that every module of firmware...