Search:

Thank's I'll try that and let you know how I make out. John

The copier starts up normal,as well as the screen.When I go to hit the start button to make copies, the screen goes blank? Has anyone seen this before. Thank's

I,m looking for the program that would allow me to output faxes to the J-1 side output tray. Thank's

Thank's for the help.I'll let you know how I make out. John

I have a IRC3220. The copy quality on the black copies are OK. The colors misalign when making color copies. I'm thinking of replacing the ITB. Any other suggestions. Thank's John

Sorry for the time lapse to your response. Yes, It's the highlighted diagram you sent. I need to re-align the shaft , that the handle turns and at the same time install the handle while loading the...

If your trying to tick somebody off learn how to spell, "end" not "and" asshole.

It is the same copier.Canon IRC 3080i. My appologies for the mis-statement of the model number. Just a civil answer would suffice. In order to get to the drum unit assy. to slide out towards you. You...

Thanks for the diagram. Do you have any written instructions to install the spring and handle,while turning the spring to add the tension on the handle release?

Looking to buy a service manual for a canon IRC3080i. Thank's John

I'm afraid it doesn't .I just need to know how to re-install the handle with the correct spring tension. Inside of the black handle there are 2 springs. One side of the spring has a hook on the...

I removed the spring loaded black handle that unlatches the drum unit tray. I caused the error code seen above. can someone tell me how to re-install it correctly .Thank's John

I took the spring loaded handle off. The handle that allows you to remove the drum unit assy,once you have removed the (2) screws. Once I realized it was spring loaded I tried to push it...

Tell me @ it.I Should have stayed away. Do you have any info on the second part of my problem, the release handle. how tp putit back on and reload the spring tension,as well as resetting the square...

Thank,s for the diagrams and response. I'll let you know how I make out. Do you have any info on replacing the black spring loaded handle, and the square shaft it goes on . It pulled forward and came...

Never seen this model before. ( They are part of the bartner network that I belong to). I get a call from my sales rep, asking if I,d be willing to look at it and that there's toner all over the...

Thanks, I'll let you know how I made out. John

I have a friend who donated this copier to his church. It,s out of state. So I haven't looked @ it yet. I plan to go tomorrow morning . Has any one come across this. I want to load up my car with any...

Thank's for the maintenance tip and your help. John

I replaced the Transfer Cleaning Blade and it solved the problem. Thank's to all !!!

I already ordered a cleaning blade, will share results once installed. Thank's to all for the good advice. John

No Fiery

All the drums are under 60%, except for the cyan it's @ 152%. I also ordered a Xfer cleaning blade . Thank's for all of the replys. John

Here's two images. It happens both on the glass and from the printer. After it goes thru "auto gradation". . Thank's John. [ATTACH]17709

I had to replace the large plate.When the copier went to Adj. Gradation, after 100 copies it had multi color background on the next 50 pages, usually it happens only on the next three. I have...