Search:

I've made a fresh install of what I believe is the latest version - 3.31c. There is no downloadable installer on any Sharp website that I know of - please provide link if you have one. There's...

Hello,

I am having a problem with SharpDesk Composer. When I drag a scanned file to the Composer icon or the Print icon (set to Composer), the Imaging app starts, processes the file, then the...

Network Setup > Protocol > Use FTP/LPD banner. It was set to "Enable". I am sure I haven't changed this option. Anyway, changed it back to "Disable", restarted machine, and the problem is fixed.
...

Just noticed that after pressing the Scan button a pop up message is displayed "Registering profile" (for about 1,5-2,0 seconds this time) but nothing happens even after 5 minutes. Each time I press...

It does not automatically identify it. The manual setup works and I can print from the phone. And as you can see from the below screenshot, the printer name is shown at the bottom of the "scanner:"...

Hello,

After trying various settings on my AR-M155, trying to get the SharpDesk Mobile app for Android to work with the machine (unsuccessfully), the machine started printing something like a test...

Yes, I thought so. However, there is no option to do this from the app. Also, when I try to "Scan from AR-M155" - press the "Scan" button, the Back button no longer works on the app, I can't exit to...

Hello,

While looking for a newer version of SharpDesk (I have 3.31c) I discovered SharpDesk Mobile for Android. Quickly installed it on my Sharp Docomo SH-01D phone and tested its functionality.
...

The AR-NB2N Network Expansion Kit is used to convert your Sharp Multi-Functional Printer/Scanner/Copier into a networked Printer/Scanner. It can be used with the following models: AR-M150, AR-M155,...

Never actually had a fixed line phone, just mobiles and internet of course :)


Well, no, I don't have it.


Yep, I have both expansion kits. But to use the fax kit I need a fixed line, unless...

Hello,

First I must say I know nothing about faxing so excuse me if asking silly questions. Here goes the first one:

Is there a way to send a fax (to a fax number) using my AR-M155? In the...

Sorted :)

I removed the shared printer, then reinstalled the PCL / Postscript Driver - it detected the printer automagically ;)

Well, before this I tried twice with the MFP driver, choosing...

Yes, I can ping the printer. And I can print from the laptop, and scan to the laptop/PC but only if the PC, which is acting as server, is turned on.

Otherwise, when I try to print from the laptop,...

Hi,

Thanks.

I print via network - the signal is sent to the router and from there to the machine.

The drivers are installed on both the laptop and the PC.

I don't remember the installer...

Hello,

I have just found out that I cannot print from a networked computer (laptop) if my PC is switched off. Apparently it acts like a server.

The printer is listed (on the laptop) as Sharp...

SUCCESS!

Actually, it must have already been working properly when I wrote my last post. It's my fault I didn't check the available options on the scanner...

When I switch to SCAN, the INPUT...

Yes, it did.

The screenshot below shows the profile I've set from Sharpdesk NST (Desktop) with all options enabled, and the printer webpage showing the details of the same Desktop profile.
9112
...

Hi, yes, I read it: <quote>When you install the network scanner tool, it create a entry in your adress book and make a link between your computer and the copier so you can scan to your desktop. You...

Found the CDROM and now running SD 3.31C but still can't get the scanner to work.

I've created a profile, selected the scanner with its static IP and in Scanner Properties/Advanced Scanner...

Thanks for the info. I've looked in the whole registry but I don't have the "Desktop Solutions" folder, and the "Common" subfolder, although there are several folders called "SharpDesk" in the...

I don't have a serial for SD 3.x and I can't find one from the local technician. The versions I'd previously installed (SD 3.2 and SD 3.31B) simply didn't ask me for a serial or the CD).

Guess I...

Just installed SD 3.31B.

The Product Configuration menu is active, but when it expands, there are no submenus.

During installation, the wizard did not offer a "typical" or "custom"...

The machine I have, the AR-M155 is only offered with SD 2.7. I will ask a Sharp technician if he can find me SD 3.3 with serial. The version I have now, 3.2, didn't ask me for a serial during...

It's not in the Start menu Sharpdesk folder. There are only these items there:
1. Sharpdesk Imaging
2. Sharpdesk
3. Start Index Status Display
4. Uninstall

I also looked in the installation...

The Product Configuration option is greyed out :(

Guess that means I need to find SD 3.3?