Search:

Cheers for the reply copier tech life on Image units sitting about 65-70 percent heading back as we speak will try a gration and and check patch sensor.thanks again mate👍

Thanks hoonboy I will try that thanks👍

Hi all am wondering if someone could help.got a c35......2 start buttons one for colour and one for black.....am the second engineer to attend machine...fault is if you have a colour document and...

Yes mate

hi all, cananyone helpe out rying to dowload ubist2xe,trid a few sitesus full of popups,to uprade firmware any help pls.

Thanks for all the reply I have been in touch with canon and will attend machine with canon tech specialist ,so will keep yous posted,thanks again

hi can any one help pls i have a new c5235 brand new ran function install stir-4 all results come back ok status, took dev units out no toner in them x4 devs,error am getting e020-0490,any help pls.

Hi guys, can any help me please, I have a c220 error c2152 I.t.b alliagnment error fitted new belt ass codes straight away,am not to fimiliar with this model, spoke to outher techs and a few...

hi can anyone help,i have un boxed new bizhub c454 internal prints fine,when copying through the doc feeder or glass it is giving me vertical lines a centermeter apart cyan and magenta,not sure if i...

hi guys can anyone shine a light for me ,i have a bizhub c280 when using the adf a4 paper once machine has feed all originals the machine displays please remove original from the glass, i checked ...

sounds as if the remote modem is not set up correct is the modem be registered with remote care this message can also be turned off

hi jam code relates to ps20 sensor which is your registration sensor...

firmware

turn volume botton down lol

hi there had something similar in the past,1.check firmware..2..check recyle pipe is not clogged.also check you sensors in 47 mode

screws on the lasers will sort fix

get a tech to reset the chip,best bet would be a konica dealer they are more than likley the ones that rechipp image units 5min work

hi i had a similar fault and in the end its was the control panel.

hi there that code is going to be one of your dev units,also check your drum/life etc

hi all,can any one help me pls. i have a ccanon ir3170c NOT PRINTING. it has a feiry h1 on the machince.i have put the feiry onto another machince and works fine.i have changed the network card{new}...

hi penelope have read your post,i can get parts for this model quite easy can also get you a drum and colour devs let me know i can email you pricing for parts/consumables.

hi folks can any one shed light on intermitting delay jams ps104 i have changed the acuators,coming out the cassettes,rhs lower door and guide.also changed registration sensor and pickup and feed...

could help you but seen in one of your posts you are in the states am in the uk fuser from the uk will not work in states machines. sorry

hi there i might be able to help where are u situated

hi there mrfuser i could possible help you where abouts are u situated.