I am sorry to be snippy about the jig.17241Yes , the jig is very hard to get a hold of. I had heard of it for several months, and it has been revised twice so far as I know. Past bulletins talk of...
Type: Posts; User: toner head
I am sorry to be snippy about the jig.17241Yes , the jig is very hard to get a hold of. I had heard of it for several months, and it has been revised twice so far as I know. Past bulletins talk of...
So son, but not only have I seen the jig, I used it on several machine to correct the problem. How would you know the correct position to unwarp the fuser. I have no reason to lie to anyone. It is an...
The problem is the frame of the machine. Currently there is a jig from the manufacturer that will properly align the fuser for longer life. There is no part number for the jig at this time.
If you suspect fuser because machine is saying "warming up" you are barking up wrong tree.That can be because the handle is not in the vertical position or you are having a toner issue in developer....
There is no easy answer here. I have been a tech for 27 years and whenever I turn in a lead or hear of someone replacing machine , I always hear that a sales person is already working on it. Lets...
If it is stuck on a screen that says warming up and will not come out of it it is a process control issue. Clean or replace the toner control sensor.You can also bypass warmup by holding utility key...
Make sure rails are clean and try lubricating the bearings in the scan wire pulleys.
That would be my answer as well , unfortunately mgmt now is making the choice to make more money and worry less about pleasing the customer.I love oem stuff.
Minolta 350. Toner yield supposed to be 2000 was more like 200. Customers and techs both hated them.
I have been using eagle one car wax on the drum surface and the cleaning blade edge to stop c-2203. We are using non genuine drums and toner that is causing the problem. The toner does not have...