How about its cable?
Type: Posts; User: tech.gasm
How about its cable?
1:How about disabling the proxy on IE(Internet options>>connections>>LAN settings>>proxy server)
2:Connect to the MFD via a crossover cable & see if it behaves the same way.
3:Perhaps the MFD's...
How about skyshots..how do they appear?
Is color also affected or b/w only?
The aforementioned MFD is presenting non existent jams whereupon I did check the registration flag which had its spring out of position.After its restoration,the jam still hadn't cleared.I then...
My queries are:
>>are u the only one with admin level access to the print server?
>>are the correct print drivers installed?
>> how about enabling the password feature on the device settings...
5 years & still counting...
Corrupt print drivers / faulty usb cable/port.
I managed to sort this issue via firmware upgrade & so far,so good.
A nother issue had cropped up with the MFD....I'm now experiencing jams 1503/4 from trays 3 & 4(PF730).I've changed...
Thanks for the heads up.
Yes it does...
yes they are...
The aforementioned MFD is experiencing paper jams from both trays 1 & 2(A4 & A4R....J4211,4212 & 4901,4902) but not from trays 3 & 4.
The jam occurs by the bridging unit,exit unit tailing @ the...
I'm running v5.3.1025 & I'm having duplexing issues in relation to Windows 7.(Printserver = Win2k8 R2).The thing is on the server,the doc is set to automatically duplex;however,there's smart...
just my 2 cents;what happens when its ejected to tray A?How about if the paper is A4?could it be the paper quality?How bout if the paper is ..say 200gsm?
on the 2nd query,how about on the print...
As the attachment shows,the magenta dev unit mag roller brush isnt fully formed despite replacing the unit about a week ago.To overcome it I did go to service mode to stir it contents but given its a...
Concerning the aforementioned MFD;when there's a time delay in loading paper whilst its running, it results in the MFD hanging(message at the bottom of the touch screen;waiting to print)...
Concerning the aforementioned MFD;when there's a time delay in loading paper whilst its running, it results in the MFD hanging(message at the bottom of the touch screen;waiting to print)...
IR-Adv C9060 PRO_Waiting to print...
Concerning the aforementioned MFD;when there's a time delay in loading paper whilst its running, it results in the MFD hanging(message at the bottom of the touch...
Concerning the aforementioned MFD;when there's a time delay in loading paper whilst its running, it results in the MFD hanging(message at the bottom of the touch screen;waiting to print)...
Went underground for a while but now am back.Thing is,how do we work it out since I'm in Kenya...any ideas??
Perhaps I wasn't very elaborative..baby steps.I have already setup TWAIN scanning on KM 2560 before whereby you have to use the document box for the retrieval of ur document.the process is as...
Is pull scanning possible on a Km-2560 whereby paper is placed on the ADF/platen & the doc is pulled from the ADF/platen from the application without using the document box?I do know this is possible...
Is pull scanning possible on a Km-2560 whereby paper is placed on the ADF/platen & the doc is pulled from the ADF/platen from the application without using the document box?I do know this is possible...
Just a few pointers.....
>>What have u changed on ur PC since u said u were scanning b4.
>>Is it working on any other PC?
>>R u using the Ip or hostname on the scanner web browser?
>>...
After observing it for a while,the MFD started behaving well but now its back to multiple pick-up;this is even after changing the pick-up rollers.
As for verification of the pickup rollers moving...
The paper weight is 100gsm,the rollers are the ones the MFD came with(it began operations in Sept 2011).Also tried with 80 gsm paper to give me the same results....