Sim 22-25.
Type: Posts; User: bdcrandall13
Sim 22-25.
Out of curiosity, what is the scanning issue???
Have you tried to adjust fuser temp using sim 43?
Has the simulation been changed on the MFP for toner level reporting? There is a simulation (26-69) that can be used to customize status and email alerts. Sharp released a tech tip # TT-012516_5 that...
From what I've seen they are good quality machines. Sharp hired a bunch of new engineers since the last models were designed which is probably the reason for them being totally different. The color...
Peerless AV makes the rolling cart that is available from Sharp. We have ordered some of their other mounts, including the wall mounts, in the past for the Aquos board products. They are very sturdy...
I've had one sitting in storage new in the box for years. We had a small leak in the room that it was sitting in and the box has a little water damage to it but the product itself is fine. It's still...
The fuser drive gear could be missing some teeth also.
[QUOTE=Leebs14;494399]I have a 2640 in an office where everyone uses Macs, it's wired into the network and everything is fine until anyone prints a PowerPoint document and then it can take up to 5 or...
Corrupt print job...
Make sure all print queue's on all PC's are cleared. A corrupt print job can cause issues like this.
F1-87 is almost always a lift motor issue for the finisher output trays. We usually see this happen when someone has set something next to or under the tray or they got bumped and the tray isn't...
A basic domain/hosted server from Godaddy can be had for around $10.00 for the first year. You can have a simple forum set up using their hosting options in less than an hour. After the first year I...
Leave the fusing pressure off.
As with any device you are taking a chance with compatible supplies. At this point are you really saving any money by not using OEM?
I've got a customer that has a Ricoh Aficio MP3351 even though it says Savin on the cover of the machine. We don't sell or service these machines and are trying to get them a machine that we can help...
These can have melted toner build on on the exit guide directly above the fuser as well as on the duplex reverse gate on the top of the right door. I've usually been able to scrape it off with good...
What kind of credentials are you using? Is this a domain network? A way that I've tried to troubleshoot these issues in the past is to plug my laptop into their network and try to access the same...
These types of issues are generally caused by memory. There is a bulletin titled "How to troublshoot a dead machine." I suggest reading over that. Also, check the HDD.
We've used these as a substitute for any devices' built in wifi in the past. They work great. They work well for just about any networked device that you do not have an available Ethernet connection...
What do you mean by a new USB wireless device? Are you using a wireless bridge to connect this to the network?
I'm curious if a solution was found for this issue. We're running into this with a machine but it does it after about 500 sheets are on the Upper Tray whether it's a copy job or print job. Height...
I've had this happen with an MXC300W although it wasn't through the wireless connection. When I attempted an SMTP connection test it would lock up the machine's web interface and the NIC would not...
Good idea to check the job log. I never thought about using it for that reason. Do you know if it shows the current meter somewhere in the job log?
Both machines were in the field for less than 6 months. just over a year from manufacture date.