has anyone tried?
Thank you
Type: Posts; User: marley
has anyone tried?
Thank you
I confirm that the problem remains!
.."Upgrade firmware to latest version... the option to turn off the address check option is now available"
I ran ... but the problem remains!
Is there any update?
Thank you
I fixed it by cleaning the
led and ccd
It happened to me too on a 3011i, I solved it by replacing the drum unit.
See doc
G
M
T
the copier is new, just installed.
I tried replacing the drum unit, the developer unit and I cleaned the laser, but I have the same problem
G
M
T
G
M
T
yes I tried
G
M
T
hello i have problem with tasklfa 3511i. Blurred image. See doc
G
M
T
problem solved?
Hello
I have a m6526cdn that makes the calibration and then appears drum cleaning. It made about 40 000 in total prints and the prints are good. But often it appears 'drum.' Why this?
I have done, I cleaned all ...
but between approximately 50,000 prints ... I'll have ' the same problem ..
hello
I have a problem with a dusting of TASKalfa 3500i
toner runs on the belt ..
and I have to use the vacuum cleaner ...
you can decrease the print margins with controls prescribe ?
default is 5mm , but I would like to reduce them
thanks
If I understand this correctly, you want to send a print job 1 time and have the printer output 2 sets, 1 black&white and 1 color.
exactly ..thanks
.thanks
when you print a document , I want the 1 black / white and 1 color printing ..
there is a command prescribe ?
24486
look here
on a kyocera printer you can launch a color print and the printer automatically ago 1 color printing and printing black / white ?
hello thanks for the help ...
the problem is from the DP or from glass?
thanks
I solved it ... I clean the density sensor under the waste toner
thanks
hello:D
hello
I have a brother mfc9440 from " Unable to print error 32 " ... what about?
but the taskalfa221 has not ftp ...:D