Does anyone have a current End of Life 3 Years out?
Thanks
Type: Posts; User: Motormount
Does anyone have a current End of Life 3 Years out?
Thanks
Thanks zoool, we'll try that.
I'm looking for some advice on this one (to fix the machine - fixing the tech is hopeless :p )
Here's the history: the tech updated firmware to GDL-M1 without consulting the DLBT that states "*This...
Nevermind, I have it now.
I need the service manual for the Samsung MultiXpress x4250LX.
Thank you.
In Service Mode > System 1 > Marketing Area > Wireless LAN Destination change to OT.
I'm here looking for the same solution you are, but this is how I got this C3851FS to find any SSIDs. I already...
In the admin settings, under HDD I think, is an "Overwrite All Data". Overwrites HDD when present, and erases all client data.
Heh. Like I always say, when you get stumped on a problem, go have some lunch.
It is weird, though: the C253 uses my Microsoft Account email login and works fine. The C284e uses my old local ID, and...
Here's a good one:
Setting up a lease-return C284e in our demo room, I attempted to scan to SMB to my Win 10 desktop: login error. Remembering Win 10 is peculiar about the login, I tried every combo...
I was going to suggest that you check the outlet with a VOM to look for that, but I thought it was too remote a possibility.
I had a client install a dedicated outlet for a Sharp SF-741 (I'm dating...
Win 8.1 and 10 can use an email address as login, so check that. Also, Win 10 can use a PIN, but not from outside the PC as would be the case in scanning. Also if the network is set as Public or...
OK, so no one else asked: you checked the wall voltage, right? With the machine plugged in and power on?
I used to test my trainees with this one, because we ran in to it quite a bit: Poor wiring...
I had the same thing: lease return with Bluetooth I just had to figure out. It's not easy, or worth the trouble. If you have all the settings enabled, this should help. This is from theUser’s Guide...
My apologies guys... reading back through this thread I see where I said "I verified the SSD bd was 6.03." If I could read AND write at the same time, I would have corrected that to read "6.05."...
habik, thanks.
First, All I can come up with is a 4 GB stick, and I have used this on a C454e today, in fact. One firmware at a time on the stick is all I've done here - it's much less confusing...
So, I verified SSD Board is at 6.03. Downgraded to C8 which went OK (Version 2). Upgraded back to E4 OK. Set to Version 5. Attempted G9, but it wouldn't even make it to the Firmware screen, just one...
Yes, we've tried three or four different memory sticks, all that have worked previously on e models. I currently carry a 16 GB, but I reactivated a 4 GB just for this occasion. Again, the memory...
Where? I checked firmware, where I found the 6.03 tool.
We haven't placed many e models, and luckily haven't had any issues. You can bet we'll be checking everything in the field after this.
I ran the SSD Tool, and it says it doesn't need to be upgraded. I think it was 6.03. I don't see a 6.05 on KM for the C554e.
Yes, the Diagnostics show everything OK.
It perplexes me that it will...
Thanks for the tip, but in this case it doesn't seem to make a difference. Before unplugging the HDD, I Uninstalled it in Service Mode, though. Correct procedure?
Thanks,
Ron
This box rolled in the door from a lease return with G00-E4 firmware, and working fine AFAIK. (Low meter scares me though). Tried to update to the latest, G00-K5, but it hangs before reaching the...
Thanks Flash. Yep, another look at the manual and that's where it is. Yesterday I couldn't see it - HDTV (hump day tunnel vision) I guess - could only see Friday from there.:p
Is there an admin or service setting to disable the doc feeder whilst I wait on the latch? I can't find one in the manuals or at the control panel. Or just disconnect the cables (wish it were a quick...
I would suggest trying a Windows 7 driver, but since there aren't any published, have you tried a Vista driver?
Pagescope Data Administrator will work. It will see the Muratec, as well as Oce in my experience, and move the address book just fine.