Thanks for the suggestion. Tried to reseat the Dimms 1,2&3.stil behaves the same.changed the dimms still same error c-c151
Type: Posts; User: thuo
Thanks for the suggestion. Tried to reseat the Dimms 1,2&3.stil behaves the same.changed the dimms still same error c-c151
Hi
Have problem with accurio press c3070 showing error code c-c151 after power failure.anybody with a suggestion on how to clear error code.
Thanks
Hi
1
I have an accurio showing envelope only..machine showing envelope fusing installed.No change of fuser unit done.help
Thanks for the reply.is there a difference between the drum or developer life
Interested in. Relay unit
Hi
What's the main difference between accuriopress press and. Accuriopress print
C3070 and 3070l
Have checked all icp including icp10.on prcb. could dcps be an issue even if it does not display a related error code
thanks
Hi
have a bizhub press c 1070 showing error code c-c101 on switching on .screen comes on displaying error code.tried upgrading firmware no change. any suggestions
thanks
i have a bizhubpro c 6501 warming up forever.open front door and close machine warms up gets ready to print .I print 2 copies then goes to warming up.any possible cause
HI
check the charging contacts
Hi
jam at registration section in bizhub pro 1051 ;j-1712 .any idea
hi
which specific sensor i have the same error code on 6501.help me with a sketch or part name or number
thanks
Hi
from kenya currently working on production digital printers c 6501 ,c5501 ,press c6000 & c7000, 1051
I have upgraded the firmware but no change. what amazes me is when i disconect the fuser unit conectors the machine does not show any error codes nor does it run stabilisation. machine just goes...
I have upgraded the firmware but no change. what amazes me is when i disconect the fuser unit conectors the machine does not show any error codes nor does it run stabilisation. machine just goes to...
hi
i have a bizhub c 360.when switched on it doesn't go thru stabilization shows warming up for a few seconds then goes to ready mode.when a document is sent to the printer it goes to the que. but...
Change dip settings as explained.then try using command work station.it will give you the option of duplicating the file you want to print without having to load each paper at a time
its possible if hd is in working condition
You can not without the harddisk
I have replaced fuser unit with a new one but machine behaving the same
Try replacing the corona charges
Hi all
have 2 bizhub 43 which were working quite well til recently . you power it on then shows please wait on the display for a short time then resets and goes to please wait again. both...
Hi all
need assistance. i have a bizhub 950 showing error code c-c104.this came replacing the printer control board.on close examination i have noted that the faulty board and the new board have...
Hi all
need assistance to reload system software in fiery ic408
bizhub c353 error code dc10 every morning from sleep mode.resets after powering on & off.
please assist