hiya all. Got it sorted. Reset top left then normal code on keypad.
Type: Posts; User: Timmytronic
hiya all. Got it sorted. Reset top left then normal code on keypad.
Hiya folks. Got a pro c7200 that needed a lube bar, all sorted but can’t access the service screen. Assuming it’s the normal numbers to access the service how do you actually get the number screen to...
Hiya.
I don’t have the experience but do on the Pro 8100 loads and the 6503/8003 range which I know are different but the drums etc and cleaning bits I expect to be familiar to me. Been a tech...
Hiya folks. No issue just thoughts on the pro c7200sl. It’s not got the 5th station and done 350k colour and 200k black. All is fine for now but never really been to service one of these but now on...
That’s what I thought, the not an re-invention is the key there. It’s a good machine anyway but didn’t know if they has done some magic.
thansks loads.
tim.
Ah thanks loads, will have a look now.
Hiya Folks.
I have a customer who has a MP c5504 and was looking at up dating there machine as they have done quite a few, they do 20k a month. Is the IMC any better and different than the 04...
Hiya
Thanks for getting back to me, so different door as usual from Ricoh and that's about it :-) Good news on the drums but I have a few drums for the 04's in at the mo so no bonus in upgrading...
Hiya Folks.
Am looking at upgrading some machines and wanted to know if anyone would have any views on the IMC range like the IMC5500 compared to the MPC 04 range like the MPC 5504. Drums Better...
Hiya. Sounds like there is an actually piece of paper in there or just not reached the sensor with the dust. As you say it’s getting hot tho it comes along something is expanding and so losing its...
Hiya
Checked pattern and all is well. The magenta is on the screw by about a 1.5mm from top to bottom, changed the whole PCU as mentioned, done Force Line adjustment and it fails on C and D only....
Hi mark
is that the manual one? I have replaced the belt and sensors and then the whole unit from a running machine next to it. So if it’s not the pcu I assume a laser alignment is required...
Seriously Phil. Get a life!
Hiya. I know it’s been a while but I have a bad yellow out of reg on a Pro c5200 and wanted to know if it what you did to fix? I have replaced the entire Transfer unit from a working machine after I...
Thanks guys. Would you say that the Pro c7100 is no better quality wise than the Pro c5200 and 8003? They use the same type toner as such and same dpi 2400x4800 so I would assume the same.
The...
Hiya. I have a client who runs a print shop and wants to add to his equipment. He has a Pro c5200 and 2 Mp c8003’s. Looked after by me and not any trouble. They do use the toner tho as we know and...
hiya. I looked at the panel today and they were both on 1 as and active and still didn’t work so still scratching my head on this one. I have downloaded the latest firmware package and will try it...
Hiya, I have a machine that has the usual USB slot in the control panel for the customer to print from or to scan too if required and on this one machine, the USB does not show. I have made sure the...
I have had customers use Ink jet paper and that always takes more than one, Have you tried fresh paper off your own?
Hiya
thought I would close this one so to help I hope. I checked the Jam log and it showed nothing, I had not cleared the memory but its unusual to show nothing even in the history. I found the...
First place I looked, I even put a piece of paper in there to give it another jam and or to see a jam, once I pressed the button it dropped it and then said to remove the paper, I did that then it...
Hiya.
So today checked all the sensors, all fine. I disconnected the finisher, LCT and Document feeder. Still the same when I switch it on. Same lights where the jam is and it makes me go in...
Hi Slim. It is actually in a chemical fumed place. Dust is around but not massively. I did disconnect the finisher and started the machine up as if it did not have one but did the same so I decided...
Hiya, I know this has been asked a lot but as Slimbob says, start a new thread as someone may know and we dont always go back to old threads for the hell of it.
I have an MP c6503 with paper jam...
Hiya. Different toner bottles but same toner. I did a mod on one of my machines while I had a few 8002 to use. You have to swap a few bits and use the same chip but it all works fine. Why don’t you...