Search:

I need a Post Script printer card (PS+PCL) card for a Konica Minolta Di2010 Di2510 Di3510. If anyone has one for sale please contact me.

The easiest way I can think of would be to use NetBIOS naming if your MFP supports it because it is a broadcast protocol and you won't have to rely on a DNS server. It can be slow on large networks...

Everything worked out quite nicely after purging the old drivers. Not sure exactly what happened but all is well after following the advice in this thread. Thanks again.
also, my netbook has 1GB of...

It's funny you mention that, I am soon to acquire a laptop with all the RAM and virtualization hooks I need and I am going to set up a Xen system. I would run virtual box on my current rig but its a...

Both of these computers are connected to the machine via crossover because the customer does not have an actual network. I am printing over the emulated LPR system included in the standard TCP/IP...

No copy track or account control

I'm thinking that it might be a setting in the printer itself but I'm not sure what such a setting would look like

The default in the driver is set to color and I used test page, Ms word and PDF all with the same result.
There is only one user on each comp and they are both administrator s
I didn't get a chance...

Wtf? That's not helpful.I already have the manual.
Thanks for spamming my thread and providing nothing valuable aside from a bump.: -/

I have a BizHub C351 I recently installed for a customer and for some reason it will not print jobs with any color. I can do internal test prints and copy in color just fine but when I send print...

I'm not sure about the particular driver you are using but in the past I have used PPD file in Mac and all of the options didn't come through on the Mac's driver interface. So what I did is manually...

That is unfortunate. Is there any official documentation about this? I need to be able to prove this to my customer and my manager.

I have a Di470 and when I use the scanner on auto-size, single sided, the doc feeder will move the paper through as if it were double sided and when the scan is saved it has only the single side....

I set up machines for wireless all the time and the cheapest and most effective way I accomplish this is by getting old WRT54G wireless routers and flashing them with the DD-WRT firmware and turning...

Yeah I've had to deal with this type of thing before. I'm very familiar with all of the print options Adobe software has, in this case even printing as an image doesn't help. I set them up with the...

It was a software problem on their part. For some reason IP511A does not like print jobs from Adobe 9. Couldn't tell you why. I did however find a way to restore the IP511 controller without a...

The error is something like Sc-47 or something like that. I'm not near the machine right now to check. The thing is I took a good controller and HDD from the office and brought it to the customer and...

The hard drive is installed, it's connected to the IP-511.

I have a Konica 7272 with an IP-511 when it takes a print job it will print one page, then the machine will cycle once or twice, print the next page, cycle once or twice, print the next page and so...

I'm only 27 so I can't really speak on this but my boss had some memorable ones for everyone.
He says the oldest one he worked on was an Xerox 813 but here are some more old pieces of junk he worked...

This is simple. Set up a static route on your router from the network not logically connected to the printer and set the clients up with a secondary router/gateway address in their ip configuration....

use proftpd or samba respectively. consult the documentation for either to set the server up and consult the documentation for the scanner to send to the server. I have set up tons of low cost ftp...

Set up Wireshark and see where the culprit is. If you don't know how to interpret it connect the printer with a crossover cable, start the capture, open office and let it do it's hangup thing, stop...

If you know the software and what library files it uses you should be able to get it to function with wine or crossover. I'm sure it will take a lot of configuring. Another method would be to install...

All these ideas I have tried and have worked well and there is only one other method that I could think of. You could set the printer up for LPD and forward port 515 from your router (assuming you...