May be problem is the machine HDD, have you checking HDD in service mode, how about partion, did its said something after test. Have you change the HDD?
Type: Posts; User: tieuquyen
May be problem is the machine HDD, have you checking HDD in service mode, how about partion, did its said something after test. Have you change the HDD?
May be its same each other, what is EPROM on ESS name? If the eeprom on both machine is the same, you could swap it on
Did you reset NVM, then setup network again and make a test, may be problem at the NVM memory
Did you calibrate CCD, if not just do it and report here :D
Hi
Did you used domain on your system network, if you did, the you must be registed your Canon into domain and then you can use network scan. hope this help
Hi,
taobao.com is the good place to buy drum, toner chip.
Hi all,
In Vietnam, the rank off copier is diference, as follow
1. Xerox (expensive)
2. Canon (cheaper than xerox)
3. Ricoh (normal price, but not popular)
4. Other
Thanks,
I'm waiting information from CANON support. Will be take some note to this 4RUM
Thanks for your soon answer,
at step 4. Yes, the copy broken before I enter the License
step 5. The board broken with E355 code, even I reset it.
I obtained Serial Number PCB by Canon Singapore...
Hi! All
I need you to help my trouble, I have a copy canon ir2525, then when i install send option on LMS server, its okie, but problem is i've not yet input soft key to the machine then my copy...
HI,
Sorry, 'cos i'm in vietnam, so these are model WC not available, in vietnam, fujixerox is main model such as DocuCentre, Document Centre, WorkCentre (small once, normally printer only).
So I...
May be problem is Stuck on power safe button.
E0001, E0007 you could be reset its.
E0007 also 'cos off fixing film problem, is there any scracth on fixing film?
It is work perfectly, and which kind off ram did you try. there is alot kind off RAM laptop, and i use success once.
Did you use OEM toner?
thanks for your answer,
I can use laptop RAM for canon iR 2545.
and in asia market, canon iR standard include only 256Mb RAM not 512.
Thanks again.
Dear 2 all,
Can i put laptop RAM to the iR 2545 insteed off using upgrade RAM
Thanks
Did you clear code in service mode.This problem happen when the Counter on controller board and counter board not mismatch, or you can re seat the jack on both board. if it not resovle you shoud to...
What is happen if you take out the HDD or can you format HDD without problem.
Hi,
Normally, the basic copi tech is:
Dispense toner turn when have signal from controller to its, if amount toner in the hopper less than normal, the developer sensor send a signal to controll...
Dark you mean black hold the paper or just like fog.
If the page with black (only black without image) may be your bias have problem, just checking the bias its include transfer, primary changer....
There is two way to enter service mode: 1. Combination key is: Addictional Function, 2 then 8 then Additional Funtion2. Additional Funtion, 2 and 8 (same time) then Additional Funtion (This work for...
Hi there,
Also follow service manual, there's not have fuer web part list, the fuser must be replace fuser cartridge and also on some china web supply, they have the fuser web roller, such as...
Hi,
There is not have fuser web part list for this model, you only have part list for fuser cartridge, and the part list is:126K23542
Cheer!
Hi!,
just checking the web fuser, if it running out off roller, you will be get promt message. nomarly DC 7000's fuser will be notice at 400K copi. There is no code to reset fuser counter for this...