DEAR ALL,
GOT A KM PAGEPRO 9100 GIVING THE FOLLOWING MESSAGE, Disk & flash system loader v.1.0.1, CAN ANYONE HELP IN THIS TOPIC.
THANKS
WAL
Type: Posts; User: copiertech
DEAR ALL,
GOT A KM PAGEPRO 9100 GIVING THE FOLLOWING MESSAGE, Disk & flash system loader v.1.0.1, CAN ANYONE HELP IN THIS TOPIC.
THANKS
WAL
Thanks Northernlife for your advice,
I have done all cleaning and checking, but till now i still get the same Error E0025-0200????
What causing such error and what is the solution?????
Is...
Dear all,
we have this machine after replacing the toner the machine gives the error 009-390 and touchscreen dose not work too, any ideas what to do?????
Thanks all for your help in advance
Dear all,
we are getting the following error after replacing all drum units and need to calibrate it but after calibrating the drum unit, machine gives the error e0025-0200.
And we need to...
Thanks guys we did check every thing you recomanded but in the end we did full PM services.
Thanks a lot for you kind assist.
Hi,
I did not, I did check for the code in the 08 but I can't find it???
Do you have it??
Thanks,
Dear All,
Need your expert advice on the following:
When ever we install the network card on Toshiba E-166/167 it will just give Network initialization..... and stuck.
the same card work...
Its just the copy or print connection on this machine.
Waleed
Hi,
We are gewtting the following problem with HP 2420 laserjet, the machine was working fine and giving error door open and than the guys haveopen th whole machine to check the connections,...
Check the black holder of the white rollers its always get broken, if it still there you can repair it with a thin wire to hold itn we tried this before.
Waleed
Hi,
we are facing tghe following problem light copy in toshiba e-stduio 650/720, any soultion.
Thanks in advance.
Hi, you got to contact the canon service center to get the platen cover, if they don't have it so you can buy it online or send the machine model. Send me your full details on the pm section. ...
HI
I am getting the always misfeed but after full check up and cleaning no paper jam and cleaningalso chk all feeding and alsoexit sensors.
I Did chk the manual but nothing helps!!
Any...
Hi,
you can find the full platen not only the motor since canon dose not sell the motor only.
Good luck.
Hi,
need for enabler for toshiba e- 452 do you have it???
Thanks
Hi,
I got the same problem we did checked all the sensors and clean them, but still same problem is there any other way to solve it????
thanks
Copiertech
HI,
YES THE MOTOR MUST BE REPLACED TO WORK NOMALL.
THANK zoraldinho. :)
WALEED
No the CCD is stay still in the same place no moving.
Hi,
Guys I am getting the following error in Canon IRC 1021i ( error E000202)
Any ideas????
Thanks
Waleed
Sorry its is pagepro 5650EN???
dear all,
i am facing a problem with pagepro 5650en, error (toner out) and we have fixed new toner in it, but still the same problem after checking the manual too, but with no luck.
Any one...
Dear all,
I am facing a problem with oki c3400n its blinking the attn. Error light, and we connect the machine with computer its says toner empty but toner is not empty and refilled.
Is there...
Hi,
The Machines We are looking OCE 3165e ??
Can you help.
Thanks you
Waleed
Dear all,
i am looking for service manuel for oce production machines can any one help???
Thank you,
waleed
Dear all,
i am facing the following problem error c55 which error between adf and copier, is there any solution or reset code???
Thank you,
waleed