Search:

Download mode is what I should use for firmware when the machine wont fully boot?

Any idea about the not being able to get into service mode?

Learning now about the Download Mode. I assume I should look at entering that mode and loading the firmware. I am using my MAC. I...

Happy Sunday,

I wanted to get some techs opinion on where to go with this repair. Plotter just started throwing this code. I am not able to get into normal service mode, the small "S" pops up...

I should explain a bit better now that I have a keyboard....

I unplugged the laser scanner cable that goes into DC Controller PCA

51.00.19 ---laser malfunction

I taped down the laser shutter...

Sorry for the terrible mobile phone post.

Having some problems at a local hospital with a M725 with no printed image. Low volume. Confirmed with the downstairs unit the image unit is fine/ new....

I have a client thats doing about a 1/4 million a month on a X1 with High Cap Feeder and Stacker. I have done all the normal Pm schedule items and then some. Most 2 times over now with the...

What did you find?

Yes very expensive unit. Usually a very solid running machine. During training I believe the instructor mentioned using a magic eraser for the print heads for gentle cleaning.

Set up the Kyocera Scanner File Utility.

Otherwise your settings up a dummy account that never has to be accessed or adjusted. Just uses to authenticate.

Sorry for bumping this, I am getting this exact issue.

After my tech was working on the SD-505, the end user just cant walk up and make a copy off the glass. I place a document on the glass and...

Sorry to bump an old thread......


I am having an issue with the Setup Tool. I have a customer with an older Task 400ci that is upgrading to a new Task 4551ci. I have tried to multiple times to...

Im currently stuck on this issue with a TA 3550ci. I spent all Friday ripping apart the switchable output. Tech support was no help. Had me chasing down a sensor that had nothing to do with it. ...

I'm currently here looking at the machine. First thing I did when I got here was jack the Magenta skew value to 300. Immediately my P14 went away. Checked registration, was the best iv seen yet....

I will try to scan the rest of my samples today.

But just because I over think things, am I fighting two different problems or just one? As in the color registration being off and the P-14 code...

So I'm having an issue with my favorite machine. To start its technically an NEC IT45C. Same as the C451 box. The issue that came up this week was print registration is all out of wack. No...

I can not find that Part # for that storage paddle. Can anyone assist. I have every other manual but not the 519 parts. boooo

Im having mixed feelings about the jig. Iv personally used it 3 times now and it seems to have a few flaws. Like you need a 3rd hand. Additionally its iffy with the lower adjustment. Im really...

^What he said. Our dealership only stocks the kits. They stopped with the individual parts some time back.

ohh herro.

We like funny pictures.

This most likely is not the way I should do this but I am in a pinch and need this ASAP.

Can anyone get me a part # for the output tray on this sucker? And better yet anyone have one available?...

I have personally changed over a dozen of those bastards. Copy comes out all black. Replaced board and works perfectly. Kyo never gave us an update.

What is the transfer belt mod? I have a C-253 blowing this code after I replaced the T-Belt.

Now is that the exact Bizhub C552 book?

Im basing my information off the ITC4 book so I know it cant be all too correct. I ask because the C4 book states "Image unit", where as yours seem to...

Honestly I thought about that. After thinking about it more it did sit unused for almost a year. When I shook the toner, it kind of sounded like rocks or something inside. I shook all of the...

HELLLLLLLLP

Going to put it out there that this is the first 552 I have been on.


Il set the story. Customer bought this machine new back in '09, not from us. Owner switched hands so...

Welcome. Thanks for posting a true intro thread. What kind of machines do you work on normally? What region do you service?