All Xerox equipment that is production units use what is called eDOC. It is a proprietary program that constantly communicates with xerox servers in Rochester to verify you are a service tech that...
Type: Posts; User: KMnyafayce
All Xerox equipment that is production units use what is called eDOC. It is a proprietary program that constantly communicates with xerox servers in Rochester to verify you are a service tech that...
Hey everyone!
After taking a two year break from the industry, I'm back in action at a Kyocera dealer.
I initially went to the machine because the lead edge of the original was catching on the...
Posting for a friend, he purchased an SD-506 for his c1070 outright, the c1070 is being return via the lease but he is looking to sell the booklet maker. Located in South Pittsburgh Tennessee 30...
Hey does anyone work for Digital Print Solutions out of Ohio? Thinking about moving over to them but I don't know anything about the company, everything the hiring managers say is really awesome but...
Just had a c5550i with a control panel freeze up with only the energy save button working. Has anyone seen this yet on the c5500 series? machine is a month old. CPU board?
I have 5 in my terrority and struggle with this same exact issue. Most if the time if the problem is after 2nd xfer bur before fuser (via panic stop) its a paper that the machine just doesn't like....
That is a perfectly normal warm up time for initial warmup.
The one problem with this machine's firmware is that if you go from a heaver weight stock to a lighter weight stock, it was say...
So I tried this post on another site, KeepItPrinting and got little to no response.
The Kip C7800 that i have in the field is overtoning on magenta. a tan color is usually printing like a dark...
Don't need your services. Since I have access to the knowledge base, I also have access to Konica Minolta's service manuals.
Hey Ya'll,
Got this issue that has just been ripping (literlly) my call backs up. Jamming out of tray three. replaced pickup/feed/sep rollers, conveyance rollers, black feed frame and actuator...
Merry christmas from chattanooga y'all.
You service tech is an idiot. Tell them to look up thick bk mode. It must be enabled in service mode. Then it will show up in the third page of paper settings. You can also tweak cpm down and 2nd...
It sounds like you might have an optics problem unless it's doing it on prints as well then it's a laser problem. Is this YOUR 7145? or a customers? If it is yours i highly recommend placing a...
Your gonna need a new one my friend, Those are notorious for going out prematurely.
The inverter has a set of rollers that need to be cleaned periodically they are on the main body of the machine just below the exit. Two screws hold on the plastic cover and another two screws hold...
I have a customer with about 80 machines all setup to use their time server so i have seen this message A LOT! Admin mode> Network Settings> page 2> Detail Settings> Network Time Adjustment. You can...
Hello All,
I got this really freaky issue going on with one of my customers. It's a mostly Macintosh environment with a C552DS and a fiery. The machine is almost new (only 3 months old) with...
Check the plastic spring loaded guide on the paper feed unit. I have seen these break where the attach to the machine and pivot. Causing skewed copies and jamming.
There are actually many things that can cause this issue. First, Has anyone replaced/messed with any of the image units? Has the machine been recently moved? It might need to have to registration...
Just wanted to update everyone on this. *It was a bad Printer Control Board. *Once I swapped it out, it was working great.
Hey everyone,
I got a customer trying to print on film (clear plastic) on her Kip 5000. it's cutting off about 2 inches of the image. If you try to print the same file on bond, it prints out...
This thing is giving me fits. Set it up and out of the box during inital warmup, it codes out with a C-3903 (Infared Thermistor low temp) Since I had another 1051 i just swapped out the fuser to no...
By Federal Law, If you are in the United States, You cannot claim commuting mileage on your taxes and therefore if you get mileage reimbursement you can't get reimbursed for the miles you drive to...
I have been in the business for about 4 years now and i make about 13 an hour in Chattanooga, the cheapest place on earth to live. You get paid in dirt my friend, you are in the same boat as...
I have had so many problems with these I'd rather not admit it, lol.
First off i check and make sure the trays are aligned correctly. Facing the exit of the machine is the front of the tray...