Search:

Copier prints fine, just every page has a light/faded appearance. Also, recently start having a "blotch" like appearance at the top of the first page of each printout - like a spilled whiteout...

It was the seperation rollers. All is well after replacing them. TY

This copier jams on every page immediately following warm-up. After that jam, you can print all you want without issue. As soon as it drops to sleep mode and cools down, it will jam on the 1st page...

As far as I can determine, they were not replaced in at least the last 3-4 years

No, Nothing new recently....

Which would you try first? Replace the rear thermistor or replace transfer rollers?

Here is the mark. It's about 1.5" from the top of the page.

Thanks...9565

All done - Piece of cake - thank you. Are the "new" ones the modification kit I've heard about? Can't seem to locate a part # though - would you know what the # is?

Does anyone know how to reattach the seperation fingers on an estudio 230 copier?

Seems the problem was simplier than expected. I have not been able to determine an actual mechanical problem and there are no records as to the age of the rollers. However, if I simply press down on...

I really think it is the rollers. The pick-up roller is new, so I don't see it being this one.

Here is where the paper gets jammed:
6835


Here is what the edge of the paper looks like:
6834

Sorry, I forgot to include a picture of the mylar - doesn't appear tore or bent.
6832

#2 worked like a charm! Thank you. Still looking into #1.

Also, does anyone know if the Toshiba e230 can email a fax confirmation back to the sender if you send a fax through the fax print...

I will look into #1.

For #2, where is the setting you are referring to?

#1: We have an eStudio 230 that is receiving an occassional error code:
E711 - Paper Jam in Automatic Document Feeder - Please Clear Paper Path.

I don't think the physical rollers are the...