I just had to bring it up. I scanned this a few times to make sure it hadn't already been mentioned before I said something.
Your errors point more specifically to the front sensor. Have you...
Type: Posts; User: Akitu
I just had to bring it up. I scanned this a few times to make sure it hadn't already been mentioned before I said something.
Your errors point more specifically to the front sensor. Have you...
E7-14 can be tied back to faulty mSata SSDs.
I hate to be that guy, but surely you've tried replacing the registration density sensor? From the manual "If the error cannot be fixed, replace the image sensor
exclusive for registration."
If they're a tech they should have known about the dip switch and password reset and this wouldn't be relevant anyways, but a very good point all the same.
Flip a dip switch on the MFP board and use sim 24-30 or 31, whichever it is to reset admin password to default and then go nuts on the rest of it.
What's the difference between a hormone and an enzyme?
I've never heard an enzyme.
That series had a lot of problems with firewalls and bad firmware causing boot loops. There was a simulation (26-10) that when enabled would permit something like 500 scans without having the scan...
35845
As you can see in the image from page 26 of the service manual there are 3 thermostats. You said you changed both of them so you obviously missed one. Try changing the correct one and your...
There was a bulletin for the predecessor series regarding adjusting the fuser speed to prevent wrinkling in 11x17 size. Perhaps the issue is similar here?
This is a really really old thread that didn't need to be revived.
EE-EL means it's overtoned. Run a couple of skyshots to even out the toner mix. It's a strong possibility that not clearing the counter is related, but check your density sensor just to be sure if...
Looks like you lost your firmware. Reflash it with the emergency update procedure and you should be back to good.
Don't forget 24-5 to clear DV counter.
I haven't seen my 363s with DSKs in ages. Was sim 24-30 or 24-31 not available?
There's always the service page login too on the web browser.
I got my kid a puppy as a present, but it died before Christmas.
Now I'm stuck taking care of a puppy.
Related note: If experiencing difficulty SMB scanning in W10 then be sure to disable password protected file sharing options.
I have a Ricoh MP201 in a kitchen of a local restaurant. It sits right next to the meat slicer. They make no efforts to clean off the scraps of meat that land on it. I can take a cover off and scrape...
I'll begin by apologizing if this was posted already but I haven't had time to comb through the last hundred pages or so since my initial absence.
There was a man in Bulgaria who drove a train...
A lot of women are turning into good drivers. So if you're a good driver, watch out for turning women!
Congratulations to the real winner of this week's presidential debate, the Voyager space probe! Flying away from Earth at approximately 62000 km/h.
It's a necessary evil, I would be happy I didn't have to order the parts new to try the shotgun approach.
Had similar symptoms on machine with data security kit. Customer relocated to a pool against our wishes. PRG1 ROM chip rusted over and became unresponsive. They had to buy a whole new DSK.
I would...
Flip your original over.
Don't forget there's a user level colour calibration in the system settings... Not quite the same as the tech level but for the issue he described it should be good enough.
E7-01 errors are compression decode errors. Typically replacing the HDD is the fix. Give it a shot.