Good luck with your new job, but I’m sure you’ll tell me all about it.
I may not get toner under my fingernails anymore, but I don’t envisage escaping copiers until retirement, not after 38 years...
Type: Posts; User: Debs1964
Good luck with your new job, but I’m sure you’ll tell me all about it.
I may not get toner under my fingernails anymore, but I don’t envisage escaping copiers until retirement, not after 38 years...
Thanks, I have been in this industry for 38 years.
I don't think anyone on here has criticised me, but it's the general 'I'm better than you' mentality of some members, and constantly making nasty...
I miss being on here, but I got so fed up with the nastiness from certain members that I decided to step away for the most part
It really was weird. I'm no longer a field engineer, I'm permanently on the helpdesk so I can only do anything remotely.
I don't know what the old device was, and it had already been taken away,...
I was operating his PC remotely, he wasn't touching it, this is what the file looked like when opened53902
No, their IT are an external company that only go on when they request it as they have to remote into the network too.
It wasn't a jpg, it was a gif (which isn't a supported file), and the file...
2 days ago I was trying to set up scan to folder remotely on a 'new' MP C307. They had just replaced an old Ricoh device, so the individual folders were set up on the server already.
I got onto the...
53844This is the panel, but we don't appear to have that model in the UK, I can't find any information regarding SP mode
Hi Paul, thanks for the private message, I appreciate it. Good luck in your new endeavours, and thanks for your friendship.
Take care x
+1
Perform SP5-801-006 memory clear for copier application
That code is missing from the manual, but there's a bulletin about it
I thought I should help a fellow Londoner (although I escaped many years ago)
If you want double sided scan as default, then make the settings required on the screen, then press the programme button (diamond with an arrow pointing to the left), and select programme as...
Good luck Mark with whatever the future holds for you, and thank you
Try updating it using the .fwu files in a romdata folder, I came across several 03s that didn't like the package firmware
The 04 colour devices did, the 04 b/w still has buttons
+1
the image is trapezoidal, so the scanner is out of alignment, someone has leant on it
I remember that post because I wrote this procedure in my little book, and it helped me many times
A firmware update may help, but switch the device off, disconnect from the network, power back on, does it come ready? Can you copy?
Now switch it off again, reconnect it to the network, open all...
It’s just been pointed out to me that I didn’t update this post. The BCU resolved this issue. Happy now MrWho :D
I'm glad I could be of help :o
The 04 series only has the SOP
Put system/copy firmware only in the romdata folder, delete everything else on the card, put the card in the device and power on, when E32 appears leave it at least 5 minutes, then key in reset 143...
I find hunting pictures extremely upsetting, well done, you achieved your aim of upsetting someone, give yourself a round of applause.
Personally, I would gain no satisfaction in upsetting people or...
You're such a nerd, I feel so sorry for your wife :D:D:D