Search:

ok, I have done this, but a have to replace CL-8 continuesly. after 50-80000 kopies. Any new suggestions?

copy is the same, print or copy

Soory for delyt, the value of vl1t is betwen 60 and 70.
After i turn of potencial control, there were no change.
What if i dissasseblay laser unit,and clean, have anybody tray this.
Second...

I HAVE A PROBLEM WITH COPY. THE WORDS IN THE TEXT ARE NOT SO BLACK. IT IS LIKE MORE GRAY.
PRIMARY CORONA, DEVELOPING ASSEMBLY, TRANSFER CORONA, PRETRANSFER CORONA THIS STUFF ARE ALL NEW. DRUM UNIT...

how can i upload finisher with firmware.

Configuration:
System Software Ver.41.01
IR705
Saddle Finisher V2
Punch unit U1



SL2 decide witch trayA/B will be selected
When upper tray is selected, selenoid SL2 does not hold...

no, the primary corona is new

screwtape you are genius. It is weird, but the problem was clutch.
I just can belevied. It just like the car wont start, and you replaced the tire and car workS
normaly.

Thank you

ivc;)

olso prints

VLT AND VLM IS AROUND 30

It is new

E197 the problem was in the poor contact (broken plastic) soory my english is not good

i have replaced complet drum unit, developing assembley, complet transfer unit,all contacts HVT, complet...

i solved E 197, but i stil have problem (black kopie and print) see attacment

6830

have a nice day

ivc

have a problem with copier.I have a black backgraund , but i still see a text masege.
the backgrund is very black. time to time the copie is normal. sometimes appears code E197. i have replaced all...