I am currently looking to recruit an engineer with at least 2-3 years experience,able to work on Colour and Mono MFP.
Knowledge of Ricoh,Kyocera,and Minolta would be advantageous as would the...
Type: Posts; User: mac777
I am currently looking to recruit an engineer with at least 2-3 years experience,able to work on Colour and Mono MFP.
Knowledge of Ricoh,Kyocera,and Minolta would be advantageous as would the...
Does anyone have any idea what would cause a C7103 (MAGENTA TONER SENSOR ERROR).
I replaced the magenta dev and the machine started to warm up, but then showed C7103 again.
On inspection of the dev...
Re:SC204, Ive had this I replaced the polygon mirror assy with no effect, It turned out to be the earth (green & yellow) from the duplex assy to the machine frame was broken, its behind the panel...
Does anyone know if you put non branded toner into say a taskalfa 250 colour copier,does it log it on the (maintenance report).
I cant see it but there is a page with rows of zero's numbers and...
Toshiba e studio 3511_4511, toner everywhere, rubbish copy quality, getting the drum out was a pain i the arse,fuser was very poor,very slow.Hated them.
Answer to my own question,one of the black developer drive gears had cracked and spilt,replaced developer assy+set up machine now o.k.:D
Troubleshooting in the manual seems a bit vague,plus the...
Has anyone ever had C7301 (toner hopper motor,sensor error K),I have changed the hopper motor and sensor
and both are working.And just to be sure i swapped both motor and sensor with the magenta...
Has anyone got a good secondhand KM 8030/CD 1080 Drum, (giving good CQ) in UK.
Cheers, worth a try.
I have a KM 8030 that is producing a line though image areas only,i have traced the line to the drum and given the price of a replacement drum i was wondering if you could polish the surface with...