Search:

Is there a local address book, all I see is LDAP?

This is from Canon's website "Scan and Send to SMB Fails on Windows 7 SP1 and Server 2008 SP2 due to a Windows Security Patch (Windows 7 SP1 - KB4480970, Server 2008 SP2 - KB4480960) that breaks...

Unfortunately in the US we don't have Health Care, we have Health Insurance. Which is why if you live in Canada life expectancy goes up by 3
years.

Memory Experts carries HDD'S. You can run the copier without a HDD, BUT you will loose a lot of functionality. You will also get "out of memory" errors when printing
or scanning large documents.

Mine was at Learning, then go to links, then reports and then learning History.
Put in a date range and it will give you excel report.

Once you replace the HDD, update the firmware. You will have to re-setup all scan folders and/or email settings.

Sounds like a bad or wrong print driver. Reinstall on a different IP address and make sure you have the correct print driver.

I am starting to see this a lot lately. Customer's are using a win 7 box as a "file server" and it also has a scan folder for scanning. If mutable people are using the "server", scans will fail.
If...

There is a bulletin, the new part # is A0HR897300.

I think the 554 and 654 are different print engines. The 554 is a sped up version of the 224. I would go with the 654, it is a closer match to the 601.

Try unchecking "quick format"

I think the default password is 00000000. I think your problem with printing is you need to add a user code to print. I would try someones access code to test it.

Is user authentication or account track turned on?

Hi All, I am trying to connect a SEM 9900x to a Toshiba 207L. I bought a Harness from SEM and set the coin box to controller type 14. In the copier, I set 08-9016 to 1 (coin Controller).

If I set...

Same here only it was a C454....."bizhub C454, C554 Special Firmware Version GCA-70 Correction of Scan to shared folder on Window 8/Windows Server 2012R2 by SMB, Server connection error occurs"

Are you a tech or an end-user? If you are a tech you will need a manual, maybe a HDD. If you are an end-user you will need a tech.

Was the drum count reset after the drum install?

Did you check to see if all the Mirrors are in place an snug against the mirror clips. Other than that I also think its not easily reparable.

This is a copy job not a print job, correct?

Back in the the old Minolta days, (DI 450) a jam caused by an interlock would not register in the jam counters....something else to check.

Also you can try adding a network switch between the copier and the wall.For me it has solved a few issues with poorly wired or wire runs that are too long.

Absolutely!

In the admin mode on the copier, check to make sure PSWC is turned on. It can be found under HTTP server settings.

Hope that helps.

Skip the C25. The C35 is OK, but not in the same league as a C224e. It all depends on where it is placed.....

Same skew on duplex copies or off the glass?