Some people here, like subaro , post useful information rather than the worthless insulting posts so many people here post.
Type: Posts; User: aab1
Some people here, like subaro , post useful information rather than the worthless insulting posts so many people here post.
All new replies seem to suggest I did something horrible to you. Were any of my replies insulting in any way without me noticing it? If so I completely apologize but I went back through my replies...
My mind is honestly blown at the kind of replies I'm getting. Where in the world did I question the advice I was given?
It's like someone hacked my account and posted something I'm not aware of...
What's wrong with you? Just because I didn't immediately take my transfer belt apart you're giving me shit? It's also not a risk I can afford as if I damage the transfer belt my business will be...
By the way if this is any hint, the streaks tend to come back after I noticed the printer doing a cleaning cycle (it says "Cleaning..." on the LCD) and will then slowly start fading over the next few...
I always wondered that, but based on the footnote my guess would be that it's capable of doing 75,000 pages per month but due to the yield of the cartridges (7000-10000 pages) it wouldn't be...
I noticed that a few months after cleaning when the issue comes back, by gently tapping the transfer belt on its side over a sheet of paper quite a bit of waste toner comes out so I have a theory...
I may try that but am concerned I may damage the belt, is it easy to disassemble that part and put it back together (I'm not a tech just an end user, but I do have lots of experience fixing all sorts...
I think I had this issue since I bought my HP CM3530 in used condition, it never bothered me that much as I rarely use the ADF but was wondering if there's an easy fix. The problem is the pickup...
I've had my HP Color Laserjet CM3530 that I bought used on eBay for $1400 for about 5 years now. It worked great until about a year ago after I think I put in a sheet in the multi purpose tray with...
It may seem like it, but not really since the included cartridges are normally less than half full. And it's only low end printers that cost less than new cartridges.
While that will solve the error, it actually prevents the pump from working which will likely lead to the printhead associated with that color to fail.
I didn't go back through the entire thread...
Thanks, that air pressure system seems a bit over-complicated compared to the ones that pump the ink directly. Was that an older generation before the ones that pump the ink directly?
Did those...
Thanks, had I not solved the issue yet that would likely have solved it for me too. The 3525 is the "printer only" model of my 3530 multi function printer so it's certainly the same transfer belt.
...
There has to be a sensor to know when the rubber bulb has collapsed meaning the pressure is gone from the ink being used so it knows to release the pistons and push them back in (the printer makes a...
That's why I didn't dare try to take it apart to reach the cleaning blade, it's not only fragile but under tension. Since I know this problem started after feeding a sheet with a drop of water on it,...
The black bulb does not pump air into the cartridge, it directly pumps the ink out of the cartridge (the ink is inside a hermetically sealed bag inside the cartridge casing, when the cartridge is...
I used to have HP Officejet Pro inkjets which use the same sort of cartridge and ink system.
The chip is only used to estimate how much ink is left, there is a separate way it determines when the...
Sorry had to make this post again, for some reason the first one only loads in print preview mode, I'm assuming it could be due to the title ending with the word print so I changed the title (edit:...
Six months ago I posted about my HP CM3530 leaving a vertical streak on every page about 1 inch from the left side. This started after I fed special paper in the multi purpose tray after washing my...
If I put a stick in the door close sensor I can get the transfer belt to rotate while being exposed. If I did this while holding an alcohol swab where the line is on the belt so that it gets wiped...
I'm not a tech I'm just looking for help with my printer. I have an HP CM3530 and lately it started leaving a multi colored vertical streak about 1 inch from the left side of each page. If I print...
I disabled automatic cleaning on my HP CLJ CM3550 because the manual says it will print a cleaning sheet automatically as needed.
My issue with that is that I print professional documents that I...
I have an HP CLJ CM3530 in my home office and amazingly despite this machine having more settings than any other I had before, there seems to be no "manual answer" option for faxes.
Since I don't...