U600 Initializing all data
Description
Initializes software switches and all data in the SRAM on the fax control PCB, according to the destination and
OEM.
Purpose
Used to initialize the fax...
Type: Posts; User: stevel
U600 Initializing all data
Description
Initializes software switches and all data in the SRAM on the fax control PCB, according to the destination and
OEM.
Purpose
Used to initialize the fax...
thank you for confirming so i can shut the customer up. again, thanks
trying to locate the meaning of the temperature icon that shows up on the display. it comes and goes and the customer says the copier slows down as it goes up and also takes longer to shut down...
thanks for the info and will keep you updated.
your so right, budget and this model copier is bad. the life of the drums and related parts are also bad. plus she is using for all black and white copies as her ricoh 2090 is worn and wasted, needs...
are all lights out and a green blinking light. the could have damaged hard drive and system firmware. try unplugging copier for 35 minutes then plug back into wall outlet (not just turn off)....
During self training I was introduced to religion but yet no fix. I march on slowing getting rid of each request for adding toner till I am down to the magenta toner needs to be changed. I tried...
it is odd when i had the toner end shut off the black developer went under toned. i re-installed the original toner box assy and as i ran copies the black came back to being almost in spec when i...
your right, thanks for your understanding. i do need to ck the outlet. the copier is in a country town and they did not have copier on surge protector and prone to storms and not the good type....
yes i am talking about installing another toner unit assy which is the whole thing even had 4 oem toners. both the original unit and the used unit has a problem with wanting a new toner just...
started with a add magenta light, decided to change entire toner assy from parts copier, then copier ran about 400 perfect color prints then went light and said needed black and yellow toner and...
using OEM toner for all colors, got a slight gray haze on background and still lines on regular paper when paper tray is set to normal paper. but when paper tray is set to thick 1 it is better and...
having black lines on color and black and white when paper thickness set to normal paper, but when paper thickness is set to thick one (no lines). lines are running from lead to trail edge. they are...
clean mirrors and glass, pay attention to haze on bottom of glass, once it is all clean run a background level adjustment. push settings button, then *09, then select background adj.. make sure...
have the hp clj cm6040mfp giving an error code 30.0.08, it happen in the morning when the customer first turns on printer. i have not seen it yet. but in the last 3 days customer says it has happen...
have a sharp ar-m350/imagistics 3510 copier that won't turn on toner motor. tried 2 developer units, pcu board, new toner, printer mfp board, toner motor. tested customers mfp board in my copier and...
turn heat down more. look at these tech bulletins.1640216403
your welcome
can u verify the model #, i don't see this model # on copystar site.
try this # 303LL46010 with a alternative # 3LL46010 wire interface.
this wire connects to adf pwb i attached the parts book. look at item # 55 on page 16.:cool:
have not swapped adf's yet. i was checking my motor when copier is in a ready state and the gears turn freely. so i know something is sending voltages at the wrong time. wiring is as follows, spf...
go to copystar.com and download all key-op manuals,about 7 of them. scanning with a program you will need the twain drivers on your pc. kyocera has command center which will help you set up the scan....
that is a good hp! it is a shame, that copier is so easy and all my customers love the ease of print and color scan to folder/pc. if you still have it, you might want to fix it. it is a good money...
it auto sets developer when you install the new drum unit assy. for rebuilt, replace the pico fuse, use the right developer (konica 7118, oce/imagistics666-6 and so on) do not use mfx-2850 (too much...
go to muratec.com and download office bridge. it is about 200mb zip file and downloads very slow, like 2 hours. when you finish download make sure you unzip completely. this will have new drivers on...