Hello
l need some help
l have a 7220i where l changed a cable scanner.l made the various setting in EDOC and now l find myself with a reduced image of more than 1 centimeter on a A3 in vertical...
Type: Posts; User: eric
Hello
l need some help
l have a 7220i where l changed a cable scanner.l made the various setting in EDOC and now l find myself with a reduced image of more than 1 centimeter on a A3 in vertical...
Hello frieds.
l have a wc7225 ( dead) no boot and digit dispay on "P".
l've only the edoc for 7120 and it's not the same.
some body can send me edoc and PWS tools for these machine.
with my...
The winner is: ESS board .
problem solving by changing HDD
THANKS
HELLO
l need some help.
l have a 550 fixed on boot sequence 3/6 on the screen !
l don't find anything in edoc about the boot sequence.
someone has it the boot sequence information ?
thanks
hello sanimir
will buy the toner chips "sold" !
Hi frends.
After moving, a 700, it does not boot !
black screen, no blinking led on the screen.
all the leds on ESS board are ok.
and by-pass not moving, same thing for tray 1 to 3
the screen...
thanks to you all
evil will not conquer
eric from PARIS
I want to activate the counting for a A3 = 2 A4
Hello
Someone can it tell me how to validate the double count with A3 on a docucolor 242?
thanks
Hello
I am looking for a training manual on the xerox freeflow server. (installation, Setup ofthe licences...)
I know well the fiery, but there I dry!
It will be connected to a 700 in lieu of a...
HELLO blackcat4866
have you find a solution at FA17 code?
because l have the same thing , format the HDD and it's ok for 1 day .
l've called the hotline , they says : change the HDD then the...
hello
l know this PB
it's charge gear problem,service bulletin 2MV-0022 (D165)
change the gear on the main charge ,by a new: 302k011041 for all colors.
hello
for this pb remove the laser shutter plate (no exist on mp c2800!!)
hello
for this pb,if you have that just after warm-up and if the fuser is ok.
clear nvram 5.801 and re-enter the non-defaut data (sheet in the door)
amizing,but it works
l had this problem 2days ago ,it's was the bloc dev BK (a problem with the manetic roller,at the front edge)
hello
l've found!
for Your information the ref is D029 5334
better than of the explanations,an image.
10615
thanks
yes, l research these connector but for the other side (inside the copier)
l thing l'm not alone with this connector broken ??
l've tryed but it's only one not refer
HELLO
l'm go in research of the reference of fuser connector(copier side)i have not found it in the parts catalogue
it's the connector with the AC wire,some one know the reference?
thanks
hello
are you cheked the SMB protocol is ON ? and try with your laptop with a cable cross
are you checked the position of your lasers after having changed them?
hello
replace the black PCU and the black dev unit ,with these model the PCU taget is 80K
not enough dev in the unit
hello
you have updated the softwares of the machine?
the version engine D0625127P corrects a problem of code sc555