08 Setting
Mode
System User
interface
Sound 9281 Sound setting --
Energy Saving
Refer to
content
s
0-1 SYS 0: OFF
Type: Posts; User: Travis06
08 Setting
Mode
System User
interface
Sound 9281 Sound setting --
Energy Saving
Refer to
content
s
0-1 SYS 0: OFF
No enabler needed in the U. S. of A. Also that is the first time I have seen the "banned user" moniker.
I actually witnessed a prototype version of that thing 3 years ago. (no names please) I can't believe it is making it to production.
Looks like your developer material is over-toned. Time to replace. With the 450 series going obsolete, hopefully these 452/453s will follow. Copy quality is crap compared to the new machines.
There are new style Therms for the e355 and 455. Also the heat roller has changed from the PISS yellow to a POO brown color. (i.e. new coating) Sorry best description.
Thanks for the info!
I was looking on WebRibbon and I cant seem to find the part number for the USB harness that runs from the system board to the front of the machine. Anyone have that number? The customer busted the...
I know they already came out with a bulletin that states, "do not adjust the doctor gap" because it will warp it. Sounds pretty flimsy. Make sure they have the hard drive installed if you want to...
If your talking about the gear that goes around the fuser roller, you can use one from a 280/282/283 series which are readily available still.
I tried it out today, it was 1,3 372 not 08 mode.
Thanks, I would have never guessed it would have been an 08 code.
This machine will let the incoming fax ring 6 times before picking up. The customer wants it to pick up after 2 rings. I have seached the fax manual and a few others. I thought it would it might be a...
Await the 20 flashes that will come out in the next 6 months.
There are 2 black arms that easily come off, that keep the duplex unit lined-up when closed. Usually you can look at both sides and see that one is missing or out of place. (I had another tech put...
Yeah, those machines and all the ones that follow do not use the old 3 digit codes for 08...ect. So you will need a new manual, cue the JustManuals advert!
I have this HP that will pull the paper through on copy mode but nothing prints out. Off the glass is fine. The error history shows 54.1400 codes. It's weird because it acts like nothing happens....
Its been a couple of weeks and the wrong belt is going strong.
Has anyone tried using a 2830c transfer belt in a 3500c. Just the belt not the whole unit. I have a 2830 belt and the customers 3500c is ripped and down. I may try it out since it will be 2 days...
Turn (08) 4546 to 0. 556 to 0 and 557 to 0. Run a calibration chart and see which color is screwing you.
Also there is a procedure to follow. kind of like the old 310/311 series machines. Follow the service manual. It is NOT the kind that just dumps in.
Close, its a Vydec.
This thread just became interesting!
I would try repartitioning/format/flash or just replace HDD/partition/flash. Your best bet is to have the customer wrap a long chain around the copier and use it as a boat anchor.
I ran into this also. Ended up replacing blade after going through the same issues.
Take apart the black main charge and clean it. While your at it, replace the grid and corona. Its shorting out.