On our Bizhub C250 it all of a sudden came up with an error code like C2555 or similar, my memory is fading in old age. The code pointed to low toner density in the magenta toner cartridge.
Anyhow...
Type: Posts; User: Hypnotoad
On our Bizhub C250 it all of a sudden came up with an error code like C2555 or similar, my memory is fading in old age. The code pointed to low toner density in the magenta toner cartridge.
Anyhow...
Found it, it was under the connectors under that plate you said.
Thank you very much for your help, it's working fine now.
This place is such a great resource!
Got it thanks.
One more question, I have the green pico fuse but can't see any shrink wrap or fuses on the fuser unit to replace, what am I missing?
That's what I am trying to do, does the connector pull straight out? I am not game to pull too hard, does it have clips holding it in?
Here's a simple question, I disconnect the two blue connectors on the right and undo the two screws at the bottom.
But how do you unplug the flat connector at the back of the fuser unit?
I...
I had trouble getting this image to upload and could not type in the same post.
But my memory is not at good as I thought, as you can see it's 226 color copies.
The machine was under a service...
http://i729.photobucket.com/albums/ww297/Hypnotoady_photos/002-7.jpg
Read my first post again, it's the color imaging units that have done so few copies, did you miss that in your haste to accuse me?
The color copies total for the machine is 252. In actual fact I...
First up thank you for your posts as it was you that suggested to someone to check the "envelope mode tabs" on another post for a copier with the same symptoms as ours.
All parts have a finite...
Thanks to the help from people on here I have finally fixed our troublesome C250.
First it was replace the color imaging units that had only done 252 copies each. I sent and got the reset chips...
To get to the 80ma fuse for the transfer belt take off the bar with the stripper finger, 2 screws, then remove the spring on the end and the circlip, then the silver metal plate that is the handle....
We have a small office and our copier that we inherited from another office has been nothing but trouble, Bizhub C250. It even wanted us to replace the color imaging units and it had only done 252...