Search:

Yes, I ran it up twice and never got a good cyan or Magenta patch
Where do I look to solve this?

182491825018251

Here are the registration lines as I interrupted the startup cycle

The fixer is heating again but I keep getting the same error code.

All the values are good when I checked...

After hours of going through all the settings and checks, after finally getting into the 47 and 36 modes I got back into the 25 too. Now I have heat in the fixer and all the parameters are good. ...

This is an Icon CPP500, same as a Bizhub Pro C500.

Two questions.

1) What is stopping the one unit from even heating the fixer? Changed out the fixer with a working one and the front circuit...

It's been a while since I've been here. But I have a problem I cannot resolve. I have two machines and my copies are (were) coming out nice and clean - very happy camper! Then I got a SC45-20...

Well i asked the boys, did the paper rip? and they said nope, just pulled out the sheets. The knock came because the gear driving the waste pick up auger couldn't turn and the gear snapped back as...

Here is a pic showing the exact spot the knocking is coming from, behind the plate the tip of the screw driver is touching. Looks like a hell of a procedure to get into that area. 11303

It is...

Thanks for all the responses. This knocking sound happens at a cold start up. As soon as I power it up and turn it on it goes through a cycle that this noise is coming from.

It doesn't have to...

I had my two boys watch the print run and they had a paper jam. They cleared it and when it started up againg it developed this knock.

Only when the machine starts up and runs through its warm...

One unit is Prince Rupert and the other is in Terrace, about 100 miles apart, so immediate test parts swapping isn't that easy, but we have done it. I have an extra transfer belt (old one).

No...

The copies are really clean now but I still have that "shadow/ghosting" issue.
I did a bunch of adjustments, Auto drum potential, gamma and blade setting

Well, that might be part of it, I had removed the entire wiper unit from the transfer belt, disassembled it and cleaned it out. When you mentioned this I looked and one side was missing a spring. ...

Yeah, there were no red screws and the wiper blades seem to be working good. I am looking at all the 36 adjustments. Are they supposed to be done in any specific order?

I didn't scrub the coronas, just wiped them lightly and blew them off with compressed air. I cleaned the fuser with methal hydrate. I will check the charge next, after I get it all up and running...

Okay, I have pulled out all the drums, checked the cleaner blades and all are touching the drums. Anything else I should look at before I put them back in?

Hmm, two red screws?? Guess I better look into that one. As for dusting powder, we were told to blow yellow toner on the drum, is that right? And what is that for anyways?

I have completely dismantled, cleaned and reassembled my cpp500 (two of em)and replaced one drum. Today I am getting a shadow image on my copies. The same image we are printing is shuffled to...

Its a fiery rip. The one that is puking toner is an external rip. As for the text, mono or colour the previous weeks print was much lighter black but the pics were nice.

Yup, tried that too but it made no difference. I have been going through the manual and can't find anything about an over supply of toner. The best analogy I can come up with is there must be a...

Okay, then the problem must be the over supply of toner. When we printed the issue I attached two weeks ago the black text came out as a dull black, not shiny and thick (like raised ink) with a...

The file was created in Corel and then saved as pdf. A previous news letter printed fine, text printed K. We tried reprinting that old one again and it printed the text cmyk. So something changed on...

Is there a print arrangement setting to have it recognize text as text and pics as pics? Have used expert color settings on the Fiery rip and every time it prints text cmyk. When I print greyscale,...

After printing and checking everything out this past weekend, and all worked well, this morning te error code came up again, SC29-22. And now i cannot get in using the P and 9272.

What gives? I...

Thanks 'Another' I read the same thing somewhere else which is why my original post was asking how to get into the service mode to cancel the count. And all I use is 20lb bond. The second machine...

Thanks for the help, I am able to get this machine to print again. Looks like it will be constant work. I am printing a 12 page newsletter, 3 sheets 11 x 17 folded. Except i can't get this to fold...