Hi
Fiery fw. version 1.1
clc4040 fw version 76.01
Since i dont have access to fw for clc4040 I'm waiting to get replay from other technician for newer firmware. As for fiery, well i have cd 1...
Type: Posts; User: cetverooki
Hi
Fiery fw. version 1.1
clc4040 fw version 76.01
Since i dont have access to fw for clc4040 I'm waiting to get replay from other technician for newer firmware. As for fiery, well i have cd 1...
I will check for restrictions tomorow.
As for config page, yes I can print that. Even windows test page gets printed. Print jobs that are sent to fiery using pcl5 driver get printed out but pcl6...
Already checked that. they are all down. Unit can only print with pcl5 drivers, before it could print with ps drivers.
Any idea on what to do now?
Hi to all.
A friend has asked me to help him solve problem with clc4040 and imagepress h1.
It was all functioning ok until last week when power supply for H1 died. At firs he thought it was hdd...
Hi Fer.
Can You please repost those? I have CLC4040 and H1 fiery. Hdd on fiery had started to act-up but i can not find disks that should have been with machine.
Hi First line starts at 25mm from leading edge and it is approx. 10mm wide. Second one starts approx. 125mm from leading edge it is wide 10mm. There was slight difference on one copy but that could...
Hi to all I have problem with arm316. recently developer was replaced and unit performed for couple of weeks fine than it started to print images with white stripes. To be exact lines are parallel...
To add one more thing.
when i tested print in duplex mode unit again has shut down. Of course paper has stopped at same position. Now machine would not start no matter what. Only after I have moved...
one update.
today I have run some more tests. I have tried checking all that was mentioned here but problem persisted.
Then i tried to copy but used bypass tray. unit went thru 50 pages without...
Hi to all and thx.
First of all to clear out this mess. Unit works fine and can print numerous copies, until (according to what i can see) fuser and/or whole unit gets hot (or to certain...
To add to my misery...
I have reseated and cleaned contacts for memory and boot rom. HDD on this unit has failed after numerous on/off round by customer ( HDD replaced and system loaded). During...
Hi to all
I have unit that is in working condition, it powers on, gets to ready state and it can stay in ready state for ages. If i start copy it is ok for first couple of pages (more like 15 to...
Hi to all.
I have access to service manual for this device but could not find any reference to this problem.
when unit is turned on only main power on led is on. it starts some of motors...
Hi
my first reaction was to try to replace dv unit (and dv). But I still got same result. Toner save option I doubt that it is source of problem since internal printout is bad (like sim64-05 or...
Hi
I have mx2700n that prints and copies in bw extremely poorly. Printout is really pale and letters are as washed out. If I print printer test page from unit (pcl test page) letters in word...
Hi to all
I heave WC5645 that has malfunctioning touchscreen. 2 months ago I heave replaced it because it would not register when it is pressed. Today customer called and complained about same...
@charm5496
i heave 4.24e version of sst.
@teckat
similar. i don't heave section with "all" on right side. only each part of firmware separately (boot, hdd format, system, rui, etc).
as soon...
it is ir6000d (at least according to SST) I heave mistyped it in topic name.
I will try to get to customer and try to flash again but this time i will get some screenshots of errors.
Just to...
Hi to all
I heave problem with this copier and firmware. I was called after customer (and some tech person) installed network board and performed firmware flash. I do not know which version or...
can you check distance between ghosted images. or between original and ghost? this can give you exact source of problem or at least narrow down search for it.
check gap between blade and magnetic roller. i had reversed effect, coloring of one side of page. print was ok but on edge f paper i had toner transferred.
Hi to all
after lengthy troubleshooting and trial and error all came down to bad developers. After changing developers and full calibration (including sim25-2 for 2 times as suggested before by...
i heave lengthy calibration procedure taht includes drum rotation and all.
problem is that all machines heave done various number of total copies. all are exhibiting same problem (to a various...
problem is that all 4 colors are off. it affects all of them, even if transfer belt is new.
2 days ago i heave opened machine and cleaned it. cleaned all drums, blades, coronas, put all back, done...
that is exactly how i do it. I clean whole machine (optics and all parts in imaging section) and then i perform calibration.
i heave 3 machines that exhibit same problem - color density on paper is...