Hi Blackcat4866 EXCB faulty ...cheers Thanks for all your comments :)
Type: Posts; User: jonw
Hi Blackcat4866 EXCB faulty ...cheers Thanks for all your comments :)
A big thanks for this .The engineer who attended told me it plugged into MFP...Should have checked. EXPB is a good shout. cheers.
Hi Allan thanks for replying so quick ! Even LCT jams . You can stop transport rollers with your finger when door open and you get stepper motor buzzing ! Power supply was my next step ! cheers Jon
Hi all need some help. C558 jamming at transport rollers hence why tray 1 still working . If you feed from say tray 2 with side door open sometimes transport rollers spin sometimes they dont and you...
check gripper soleniod loom | Prone to breaking ...
cheers jon
Just need to tell the m/c in service mode it's got a doc feeder...
Hi Got the same problem with a c220 yellow error code tcr level about 2%. will manually add and level goes back to normal. we have fitted new toner hopper(with sensors) and a dev unit... still the...
Thanks Hans for some reason i get really old posts on my recent threads...surprised i haven't had any feeds for ubix 100 25 years ago :D
jon
LOL still getting used to this :)
try changing the paper some cheap recycled stuff can smell really bad on a long run.can only think it's the bleach and stuff they put in it
cheers jon
Thanks for all your info ..will keep you up to date on progress
Cheers
Jon
Cheers
Great info... thanks for your help
Hi hope someone can help got a c652 with tray 3 jams done all the obvious but misfeeding in tray j 1301. I think i remember someone fitting a ribbed pickup roller from another model.. any help...
get them to change their paper... some paper after fusing can smell like ozone
hi new black image unit required or try cleaning charge grid to get around it jon
had this a while ago turned out that an application they used wasn't supported by the on board ricoh fonts. in the driver there is a download true fonts setting. worth a try.
I've had a dodger exit sensor before . it checked out ok with I/O check and with a meter , i guess it just got a bit lazy.
Agree with previous thread had a mp7500 all copies you could rub off with your finger after replacing every thing fuser related turned out dodgy batch of non oem toner ,had run for 500k on the stuff...
Had similar problem a long time ago same M/C. From memory turned out whoever printed their letterheads had put a coating on the paper during their printing process. if we cleaned the tyre's 2 weeks...
Thanks for help. Managed to sort it by doing a memory all clear .Had to redev but set up a treat .Good as new ....... Cheers
Hi m/c just ran out of toner and saw bottle it was empty. Goes through routine of adding toner bottle spins but no good ..even chucked toner into dev unit still no good.
ricoh 2035 toner issue
I been looking at an af 2035 (yes i know it's an old dog) Customer put in a new toner but still asking for toner. Bottle spins toner drops into dev unit but...
I been looking at an af 2035 (yes i know it's an old dog) Customer put in a new toner but still asking for toner. Bottle spins toner drops into dev unit but still asks for toner.dev'd m/c but...