Thanks for taking your time to reply to my post. Here are my answers to your questions:
1. This is a standalone PC and is connected to the copier Peer-to-peer via a switch
2. Tried the UNC...
Type: Posts; User: MFPTech
Thanks for taking your time to reply to my post. Here are my answers to your questions:
1. This is a standalone PC and is connected to the copier Peer-to-peer via a switch
2. Tried the UNC...
Resolved the issue by scanning to USB lol
Sent from my SM-G900W8 using Tapatalk
Hello,
I am trying to setup Scan to a Folder on my Win 10 PC and I am getting the login error 1102. Tried SSL (SMB 445 Port) beside the default 139, tried different combinations of the Hostname...
brand-new SP 4520DN drops off the network.
The printer goes to energy save mode and does not wake up when sending a print job to it.
The only way to print is by turning the machine off and on. ...
You do not want to deal with a customer that has an exchange server and no IT, trust me on this one.
Sent from my SM-G900W8 using Tapatalk
That's correct, you have to enable the HDD.
Sent from my SM-G900W8 using Tapatalk
Surrey BC, not Surrey England lol
Sent from my SM-G900W8 using Tapatalk
Ask the Exchange Administrator.
Sent from my SM-G900W8 using Tapatalk
Reset the machine in SM - clesr all, setup network and fax, install movie data and MFPTech is your uncle
Sent from my SM-G900W8 using Tapatalk
Print a config page - see if the IP info is there.
Change the IP to a different one, print the config page again and see if the new IP is there.
Give both config pages to the computer guy and tell...
A packet capture will clarify the issue. Machines drop off the network mostly due to link flap on the switches.
Sent from my SM-G900W8 using Tapatalk
Ask Net Admin to plug it to a different port or a different switch.
Sent from my SM-G900W8 using Tapatalk
I have 20 of them in a production environment
Sent from my SM-G900W8 using Tapatalk
You are right, that was the solution in more than 3 occasions. Forget about the service manual, it will confuse you :)
Thanks!
Sent from my SM-G900W8 using Tapatalk
Is this the right forum for Zebra RF Scanners please
Thanks in advance
Sent from my SM-G900W8 using Tapatalk
Is this the right forum for Zebra label printers please ?
Thanks in advance
Sent from my SM-G900W8 using Tapatalk
USB doesn't support scan to folder, does it?
Sent from my SM-G900W8 using Tapatalk
Thanks!
Sent from my SM-G903W using Tapatalk
Yeah, that is what the manual suggests.
Sent from my SM-G903W using Tapatalk
Hi,
This Canon iRA C5235A had the error E540-8002 intermittently and now it's consistent.
Took finisher apart, checked and cleaned sensors, re-seated the connectors on the Finisher PCB,...
hi,
This error is haunting me ...
first time it happened I went on site with both Bk Drum and ITB. Replaced the Bk Drum but it did not fix it so I put the original drum back and replaced the ITB...
The SM says that a HDD out of specs is connected - The machine is brand-new!
Trouble reset fixes it temporarily but then it comes back!
Any ideas please
Thanks!
Sent from my SM-G903W using...
Found the solution. There is a "inside / outside" copier setting for Tri-fold. Found it in the user guide.
Sent from my SGH-I337M using Tapatalk
The customer is printing a brochure but the folding happens on the right. Is there anyway to change that without changing the page order please
Thanks in advance!
Sent from my SGH-I337M using...
The customer is an end user, not a graphic designer. The job was sent to them. Modifying the job is out of the question. ..
They just want to print the job as is in color for top page and black the...