Search:

Symptom

0C10/0112/0113 Jam Code due to a piece of paper remained after jam removal
Description

0C10/0112/0113 Jam occurred.

- 0C10: Fixing Toenail Jam

- 0112: Inner Delivery Sensor Delay...

Hello, I faced the same problem and a piece of plastic was in the form of a thin thread over the primary base. I must use a light from the devloper unit side to see it.

E051-0000
At start-up, home position is not detected when the horizontal registrationassembly is moved 100 mm in the direction of home position.
Main cause The horizontal home position sensor is...

Laser power shortage error
At the time of measurement of 8 bright section potential
VI at potential control, the grid bias Vgrid is more than
100 V at least at one point.
• Dirt is applied to the...

Hi.you have to check up to that the Reader Unit Cable is connected properly.
(Printer communication error)
1. Check the connection of the Connector with the printer.2. Check the power of the...

HI.maybe you can check this
Secondary Transfer Outer Roller
Since the resistance of a paper changes when the recycled paper having bad surface nature
is used under the high temperature and high...

-Error in Developing Assembly

The value is higher than the upper limit for the patch.
Go through the following: DISPLAY > P-LED-DA; perform
cleaning first If P-LED-DA is 3F or more.
1. Check...

Hi.i had same problem two weeks ago i checked every part related for cassettes but problem still same, i did clear all after that the machine work great (do not forget to adjust the machine after...

Hi i have been working in beirut lebanon for the last 20years I am trained on the CLC700/800, CLC1120,1150/1140,1180, CLC1000,2400/4000,5000,5100
IRC3200 series,IRC4580,5180, IMAGEPRESS C1 and have...

HI. Please Please I need very urgent help… I have canon copier machine ir3100. when I make copies, the copies is very bad look like needs cleaning blade, but I replaced new cleaning blade, new drum,...