Search:

Bizhub c250 is correct model I believe, Somebody please help me with where this menu selection is. I have been all over the menus in all the modes. I was proud of myself for successfully configuring...

21745

I have replaced the SC board and removed the optional memory with no change, (see attachment). We cannot get the customer to upgrade and I need to find a fix. Anyone have any ideas or...

My Bad, I apparently used a defective copy and not the test original when I tested scan on glass to eliminate the ADF and customer does not print at all to the machine. The problem was in the adf...

DNS cannot lookup/resolve hostname if IP works and hostname doesn't. Ensure your DNS configuration is good. Try a temporary DHCP setup on the device to see what the DHCP service at the router...

I really hope I can get affordable healthcare this year.

I just upgraded my home PC to W8 so I would know what I am doing and now my DP-190 is dysfunctional so I can no longer scan. I am going back to see what I can figure out. Thanks for the replies.

Smear\skip (skinny letters) vertically 12.5 from LE. Have installed zebra kit and thoroughly inspected fuser and exit transports. Watched with intlk cheated and cannot see anything abnormal. Anyone...

I am fighting one of these guys (c2126) that another tech spent three days with the bulletin and never did get working. I am struggling with the same issues along with several broken harnesses from...

Thanks for the experienced replies. The cassette and catch were fine. Roughing the polished area of the shafts where the one-way clutch turns and applying a little grease to the clutches appears to...

New Rollers and feed clutch. Intermittently declares a missfeed, paper never makes it out of the tray. Slight LE buckle in the center of the sheet when I slowly remove the paper tray. Is there...

The 4550ci is a superior product that maintains print productivity by keeping up with toner consumption. The 500ci dead cycles alot to replenish. Induction fusing and led exposure are nice updates...

I had a similar issue and fell into that black trap. The dev particles are dark but covered in their respective toner they become yellow or whatever until you manually brush the toner off them and...

I don't have a PS option available and if I did it would suck as panasonic hasn't updated their firmware on this guy for ages. I was able to get it to successfully print their docs by removing the...

Tried installing a PCL option key w/firmware update and current PCL driver from panasonic. Some jobs print great but others flash the green light at the control panel 3 times before dissappearing...

Perhaps you have the Access Lock Hypas app installed. You would have to remove that. Also If you are set to require authentication this may be your problem but a u21 should have reset that.

Have you tried U21?

There is no hole on the side of the control panel like the Dialtas I am used to and I cannot find it anywhere on the machine. Any help appreciated

Problem Solved; Bad connection in Drum Unit. Thanks for the reply

Color Drum Fixed It!! Thanks for the replies

Never heard or seen that. There is a recent firmware update for this machine.

Customer replaced all three color PCUs trying to fix. Also has SC471 random. Pulled drum, dev units and pulled out transfer belt assy. Had streaks so I cleaned and dusted the cleaner and cleaned...

Replaced Drum & Developer, reset counters. Had extreme difficulty getting F8 ATDC setup to complete. Abort 0000e0422, 201, 004's and random other codes no doubt. Missfeeds Area O all three trays now....

Watch out that the driver you are using matches the OEM destination mode setting U265. For example if you are using a CS driver then 265 should be set to 66. If you are using a KM driver then 265...

You can get the parts list but it aint in there last time I looked
303NB24070 Drum Guide is the D6 paper guide
303NB34050 Label D6 is the label

I know this is a Toshiba box that we trained on and never sold. Are these customers happy with reasonable parts expense to keep running? Any info appreciated