Search:

Type: Posts; User: molson

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Thread: km 363

    by molson
    Replies
    3
    Views
    496

    Re: km 363

    thanx ill try that
  2. Thread: km 363

    by molson
    Replies
    3
    Views
    496

    km 363

    just replaced tray one feed motor and machine is saying tray one unavailable is there something i have to clear out or reset after replacing it??
  3. Thread: mp 3003

    by molson
    Replies
    2
    Views
    629

    Re: mp 3003

    if i do color registration will work fine on regular paper heavy stock paper within specs through the bypass the black is off with other colors correct paper type and weight selected
  4. Thread: mp 3003

    by molson
    Replies
    2
    Views
    629

    mp 3003

    going to another office to work on a 3003 that has a color registration problem only seeing the problem when feeding heavy paper through the bypass and looks like black registration is off from...
  5. Replies
    4
    Views
    1,253

    Re: M5155 undertoned

    Naw new machine 20 k on both. First toner change
  6. Replies
    4
    Views
    1,253

    M5155 undertoned

    I have 2 m5155 that have the same problem light in left side and looks like it is starving for toner trying to blame it on the use of compatible toner any other ideas ?
  7. Thread: hp m806

    by molson
    Replies
    3
    Views
    2,269

    hp m806

    customer complaining when sending print job it is printing really slow
  8. Replies
    2
    Views
    1,225

    Re: km bizhub 364e wont boot up

    bad dual scan board just letting everyone know
  9. Replies
    2
    Views
    1,225

    km bizhub 364e wont boot up

    it is not resetting like the ssd problem screen comes up to the towers and says konica minolta in upper right corner on screen and thats it fuser is warming up scanner is turning on and checking...
  10. Replies
    3
    Views
    586

    [Jamming] Re: km image press 7000

    thanx guys ill try those things on monday and let you know
  11. Replies
    3
    Views
    586

    [Jamming] km image press 7000

    jamming from tray 4 and 5 code 1701 replaced feed tires and added weights any suggestions
  12. Thread: km bizhub c7000

    by molson
    Replies
    7
    Views
    4,738

    [Jamming] Re: km bizhub c7000

    replaced duplex spring loaded curved guide plate under decurling assembly and took care of problem thanx
  13. Replies
    4
    Views
    1,045

    [Misc] workcentre 7435 skewing out of tray 4 HC

    tray 4 has slight skew that the customer is complaining about. tried new rollers and adjusting tray.
  14. Thread: km bizhub c7000

    by molson
    Replies
    7
    Views
    4,738

    [Jamming] km bizhub c7000

    copies come out wavy when coming out face down and jam going into duplex machine has only 70k on it cleaned all feed tires and replaced decurling roller any suggestions ?
  15. Replies
    754
    Views
    318,144

    Re: Canon service support tool

    i need lastest support tool markolson1025@yahoo.com
  16. Replies
    2
    Views
    567

    Re: SD 700 SAYS JAMMED

    happens at initial start up wow no suggestions?
  17. Replies
    3
    Views
    584

    Re: CS-C3225E fuzzy copies

    yes i did
  18. Replies
    2
    Views
    567

    SD 700 SAYS JAMMED

    machine says it is jammed in (b) not master or paper jammed any suggestions?
  19. Replies
    3
    Views
    584

    CS-C3225E fuzzy copies

    copies look fuzzy not crisp and sharp has new black dev unit has 125k black copies and 15k in color cleaned everything in side (drums,dev units,tx belt ) any suggestions?
  20. Replies
    4
    Views
    601

    Re: sharp mx-3501n has a blur

    blurs on printing and copying and blurs front to back on black and white and color
  21. Replies
    4
    Views
    601

    sharp mx-3501n has a blur

    only on one line of the copy and not always in the same place tried swapping fuser units thinking secondary tx belt next just looking for a little insight and hopefully some help something slipping...
  22. Replies
    3
    Views
    583

    quick question on sharp ar m207

    does the exposure lamp stay on continuous as long as the copier is turned on?
  23. Thread: sharp arm207

    by molson
    Replies
    6
    Views
    832

    sharp arm207

    blurry on solids and pictures photo mode even worse looks like a laser but want others opinions
  24. Thread: canon 2800

    by molson
    Replies
    6
    Views
    1,114

    Re: canon 2800

    so looks like preregistration jam on turn on
  25. Thread: canon 2800

    by molson
    Replies
    6
    Views
    1,114

    Re: canon 2800

    got 3 registered


    0723 1310 FFFF 0 0A03 0 0
    0723 1309 1309 1 000A 0 0
    0723 1231 1309 0 0A03 0 0
Results 1 to 25 of 41
Page 1 of 2 1 2