I was having the same problem on an older version of that machine and I called tech support about it. They told me that I had to replace the NVRAM and to not copy over the data and other setting...
Type: Posts; User: SCSI
I was having the same problem on an older version of that machine and I called tech support about it. They told me that I had to replace the NVRAM and to not copy over the data and other setting...
I dont remember how to set up scan to folder on this machine
If you need to scan you can download scan router lite and use that to set up to scan to folder, make sure you put in the firewall to...
We just got the Savin c9145 which is the new color copier (Ricoh MPC4501) and we are doing some testing on it. To see if the old black drum units from the Savin c4040 (Ricoh MPC 4000) will fit but...
Kind of sounds like the charge is not being removed from the drum. Could be the quenching lamp is bad or not working correct or the drum could not be grounded properly.
i was having the same problem with at&t. i had anything set up to go through at&t servers but the problem was they only had one account with one email set up. if they were using their email and...
A sc495 is a toner recycling error. In the back of the machine where the transfer unit dumps the waste toner there is a sensor. Sometimes it gets dust or toner on it, also there is a gear belt that...
User: admin
Password: (Blank), password, or admin
User: supervisor
Password: (Blank), or password
These work for me, hopefully one of them works for you
Is the bottom toner empty? If it is, if you take off the side cover you should be able to tug on the locking rod to unlock it. dont tug to hard, it might break.
I had same issue and customer did not want to upgrade the printer. They had an older computer in the back with xp-32 on it, shared it from there and it works fine that way
It is Laser synchronizing detection error: start position for Black
Try reconnecting the connections from the laser unit and the main board.
also could be a bad laser unit hopefully its still...
i have not replaced the shift tray motor that is my next step. and yes i have checked the exit actuator and it looks fine and swapped it with another just to make sure.
Thanks for the help
I have a 2105 that is giving a sc738
SC738: Finisher Shift Tray Lift Motor Error (B478)
Definition [B]
The staple mode HP or shift mode HP sensor does not activate within the specified
time...
Thanks a new SD card worked.
No this is the one that it came with. It was at the customers location for over a year then just out of no where this came up. I think another SD card might fix it but I don't have another machine...
I have a MP 3500 that is saying SD Card Authentication Error. The machine has print, scan, fax and everything is working just fine. In the service log it is showing an SC866 which is
866 B SD...
i have a customer with a Ikon Business Pro 500c or a Biz Hub Pro c500 with an error code of c29-22. it was getting a black line before the code. i have called a couple of places and none of them...
if the bands are vertical i would think it could be transfer. try cleaning out the transfer cleaning unit, or could be a mark or scratch on the belt
I have a customer with a SPC410 that we put user codes on. I have checked all the menus that i know of but cant find where to print out how many pages each user code have printed.
Thanks
Tom
I have had the staple cartridge not feed staples forward. when it tried to feed the staples forward it would register a jam. a new staple cartridge fix the problem