I Have the same problem with tm-c3500.
But i can print nozzle test and label, the error occurs when I open the ink or Maintanance cartridge cover.
Have you find any solution ?
Type: Posts; User: mdaniel
I Have the same problem with tm-c3500.
But i can print nozzle test and label, the error occurs when I open the ink or Maintanance cartridge cover.
Have you find any solution ?
Hello everyone
Does anyone have the manuals for this device ?
Thanks in advance
Hellow
Does anyone have the service manual of this printer.
My mail is marcio.infor@gmail.com
Thanks
Hi
Does anyone have the part catalog of Canon pixma Ip110 ?
Thanks
Ok.
Tanks.
I will open the request in correct place.
Hi
Does anyone have the part catalog of Canon pixma Ip110 ?
Thanks
Sorry for only giving feedback now, but end of year wasnt easy.
The problem is solved, i have changed the sheet scrapper and the black starter.
The machine is like new again.
Thanks.
I will Try.
I complety forget to try the black sarter.
Thanks
Hi there, i have a canon imagepress c1+ in client printing with photoceramic toner.
The magine is printing in good conditions, but is losing toner in the print image.
Link to print Shared...
Problem solved with board replacement.
I have a Canon Maxify MB5050 with LCD screen dead at power on, and orange light fixed.
The machine doesnt do anything more.
Does anyone have a similar problem?
Best regards
Márcio Daniel
hellow everyone.
Im having the same problem e020-0486 in most cases, the machine works fine for 1-2 days and then start printing with bad quality and then apear the error.
Printing a calibration...
Thanks
After disassembly all part off the unit it came finaly out :confused: and now i can finaly focus in the real problem the famous e020.
Thank one more time for the help.
Best regards...
Hellow
Im having some problems pulling out the processor unit of a Canon imagepress C1, i have release the screw how is described in the service manual and the unit still locked and dont slide out....
Hi
Does anyone have manuals for the maxify series ?
My email is marcio.infor@gmail.com
Thank
Hi,
I have a Samsung SCX-4825Fn that present the following message "Nvm.C 2243 NVMD" and turn on the warning light. The machine does nothing more and i cant get any information about this error...
I want to know if anyone can help me with this problem in clc-1100, i have clean all the inside of the machine and the machine was printing ok, then a few days after the stripes start to appear...
First a thanks to everyone for helping.
I'm sorry for the delay in give you a feed back but I've been away and without any possibility to reply sooner. Your both post were right, there was a minimal...
Ok thank i will do that.
Bestregards
M.Daniel
Hello
I’m having some problem with clc1100 , the problem is in auto gradation of the machine.
When we try to do the auto gradation adjust, the machine print the sample to read but when we place...