Search:

My Fuji Xerox CM 305 df get Controller Error 116-317 Restart Printer, what is it? and what i have to do? please help and thanks

I want to change the size of A3 paper is a side paper deck S1.
Thank you all for advice

Hello everyone, I wanted to know EAM-DAT and ELA-DAT in iR2535 #CLEAR it has nothing. But I went into SERVICER MODE #CLEAR did not find them.
26617

http://youtu.be/9hvA6RGf6PU

Hello everyone.


My original Size LGL., But copier A4 copy paper is automatically selected., But if I select a size LGL copy paper as the original.
Picture in...

DC286 copier then show a paper jam code 077-103.
How to make corrections

Thank you very much. Concluded that the first panel, the motherboard is broken.:o:o:o

I moved out RAM of the main board PCB1, 2, and cleaning. Back to install the same.
Broken but still not resolved. The screen remains blank. The screen does not show a progress bar when turned on....

Yes does the screen show the progress bar when powering up. Screen is blank .

iRA6055 screen is dark.
Turn on main switch but screen is dark. Lamp main power on control panel is light. But the machine does not work. Help me please.

iR3235 To cancel "remaining data that is not needed is being erased".
Help me.

I have to say a Big thanks to zoraldinho for you good advice given to me? Actually, it is in the 2nd option level mode and down in to LCNS-TR>ST-HDCR2, change from 1 to 0.

it is possible to disappear the message?

iRC2880 show's "remaining data that is not needed is being erased. Do not turn off the main power." If you want to but I do not get to show it. I'll have to do. Help me with it. Thank you very much.

I get my Canon ir5070 parts catalog and service manual with it.
Thank you very much.
E-mail: joesaima7749@gmail.com.

Thank you very much for your great help.

Help with the iR5075 show code E423.
I thank you in advance.

Do not have any effect. Just delete spam in HDD.

Try HDD clear preview
COPIER > FUNCTION > SYSTEM > HD-CLEAR

E004 The IH power supply is faulty/the IH control mechanism is faulty.
After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
0104 There is an IH over-current.
- Check...

It is the standard distance between the Corona line with the drum.
To prevent pinhole or white spots on the drum.
Should focus and follow strictly.

E733
0001 A fault is detected by the main controller PCB in the communication between
the DC controller PCB and the main controller PCB.
Main cause The connector has poor connection. The DC...

Finisher controller PCB/Host machine DC controller PCB
1) Does it improve when the host machine power switch is turned OFF/ON?
YES : End
Wiring
2) Is the wiring between the finisher controller...

Thanks D L P

Try and clean the corona wire. transfer, pre-transfer and primary. because these symptoms may be caused by dirty

Good luck

hi amitlama_78.
Because you are editing main board. You need to modify the main board is the same as before. Then change the firmware to a previous iR5020i machines will return to normal.