I also have a 7002i in a school just bought in August 175,745 count & is streaking real bad front & back just replaced the Dev. unit and it took care of the problem!
Type: Posts; User: Techman1000
I also have a 7002i in a school just bought in August 175,745 count & is streaking real bad front & back just replaced the Dev. unit and it took care of the problem!
I did my first PM on Taskalf 6200i, 90 miles away everything went well.
Now get a email from the customer that they have a code 7301, so now I'm wondering if there was a piece of mylar taped over...
I would like to know what other technician's think about running construction paper in a most modern digital copiers!
I was contacted by one on my customers, ( happens to be a school ) wanting to...
Well, here's what the problem was, Kyocera calls it MPT assy. the manual calls it the paper conveying unit 2, part #302K994012. I would advise anyone with this problem to replace the whole unit given...
I haven' tried the loop adjustment, but I can't see how that would have changed, I'm the only Tech that has worked on this machine for 4 years, by the way this copier is 90 miles from our shop. I'm...
I have tried everything I can thank of still has the problem, sometimes you can one copy ok but more than one this happens Reg. sensor checks ok , new feed rollers, new transfer belt, I need some...
31432This repair took a lot of time the Actuator for the lift sensor & exit sensor had been pulled out of track. OK, this call ranks in the top 10 as one of the worst copier calls I've seen in over...
ok here's what I know, it appears from the event log that code 9001 came up 1st
This copier has the DP-771, now you can copy only from the glass.
If you put a copy on the DP-771 the original...
Thanks Blackcat & Kidaver
sorry you're right typing error DF-770
Help anybody
I cannot find this spring in the parts manual for a DF-770 on a 5500i
I will post pictures of the spring & where it goes3029930300
Amen! I don't have the problems anymore since we service Kyocera's
Ricoh & Savin were the worst about leaking toner & developer.
29 years in the copier field, I was approached by my boss in 1985, before that I was a electronic Technician in the shop as a bench technician for 6 years, for a grand total of 35 years in service!
...
there's a rubber piece right in between mag roller and housing that's hard to notice (see attached pic)
...
Kyocera Taskalf's seem to be very good!
Having been in the business over 30 years the savin liquid were pretty bad!
But the modern digital copiers, I’d have to say Toshiba.. the ES -550 with about 2 mil copies the devl. Unit would leak...
This one about drove me nuts we ended up swapping out the finisher then it happened again on another finisher.
The gear in this picture ended up being the problem, the gear on the right is the...
How hard is it to take the sensor out, the manual is not very clear on disassembly of this!
Has anyone seen this before, the manual says
Duplex sensor 2 (DUS2) does not turn on duringpaper feed from cassette 3 (paper feeder/largecapacity feeder).F4404 Duplex sensor 2 (DUS2) does not...
The Kyocera rep came out today & reload the eprom, he reloaded the software on the eprom & now it works!
He said that this is the first time he's seen this on this model!
I reset the finisher error 906 2 or 3 days later they call back with the same thing, i've took the finisher apart can't find any problems.
When I run test copies stapling & finishing everything...
End ed up being the eprom on the main PWA board, a Kyocera rep has to reload the eprom, thsi is were total count is store & mac address
Thanks I will try this as soon as I can get to this machine!
Help Anybody have any suggeations!
I have a Kyocera Taskalf 520i unable to recognize on the network, I've replaced the main PWA board. The copier works but cannot send email. When you do a network...
Check the drum unit, We have had the cleaning unit inside the drum unit locked up on Taskals 520i, which is almost the same drum unit.
When this happens it puts such a atrain on the main motor...