thanks bro, I'm going to try it
Type: Posts; User: liontech
thanks bro, I'm going to try it
Phil!I changed everything.. all boards, all units, laser, drum, developer, hdd, firmware.It makes the failure in copies as in prints.:(
Hi guys!
I need to consult something because I have already tried absolutely everything.I have many ricoh pro 906, mp 9000, mp1350 with the same problem.
Randomly throws a black page with white...
Guys, the problem was low input voltage, I had to buy voltage stabilizer.Thank you very much for your comments.
Sorry for the delay in responding.
I think so. I did tests on similar machines and the temperature drops from 190 to 184, 185.The machine is installed at 2000m above sea level, but I do not think that influences because there are many...
Yes, the bracket is correct, I checked a bulletin that talked about that and the temperatures are well configured.Thank you very much for the reply
Thanks for the replyThe code appears when the temperature drops.From the fifth copy begins to decrease the temperature
Hi guysI have a strange problem with ricoh mp7502When printing a job, the temperature drops a lot, starts at normal temperature (190) and falls to 160 !.It does not throw sc code in the screen, but...
Thank you very much Ruben!
:D:D:D:D
hi guys
I bought a ricoh mp2553.
I need to enter the SP mode.
now is not the simulation 107.
I was told that there is another addition to the 143 simulation.
Can anyone help?
Thanks!!!
The problem was the AC Drive. I had a bad sector.
Thank you very much for your time and help!
HI guys
I have a af3260, enabled me well, but not copy.
When turned on does not make the process control and motor does not start nor any heat the fuser.
Not mark any code
Please help!...