problem resolved...the waste pipe connecting the main unit to the sub unit was not pulled together tightly.
Type: Posts; User: mark921
problem resolved...the waste pipe connecting the main unit to the sub unit was not pulled together tightly.
Hello...we are having an error which will not reset..."replace waste toner container". occured while in sleep mode. the waste toner box is new...and i cleaned magnetic sensors 1 and 2. also...
sorry for the delay, but the resolution was really simple...2 of the communication cables routed into the power unit were switched. solved the issue right away. Thanks Z!
Hello...i am installing a used c6010 in my shop (247,000 copies)powers up fine...feeds paper fine. However during off the glass copies, the color arent matching what they are supposed to be, For...
just what i thought. I've worked on many C1's, but the pitch lines seems unsolvable. One thing we have done that seems to work to a degree is add "noise" (through photoshop) in heavy saturated...
I know pitch lines on the C1 (C1+) has been discussed on this forum more than a few times. Other than changing the flywheel, has anyone found any other solution? I tried the new style flywheel, and...
How about the NP-200....with moving platen and the LFA located right above the toner supply. As I recall the toner came in a foil bag which you had to cut open and dump in by hand. Toner dust would...
Thank you very much, Teckat!
Hello;
I am looking for part numbers for 2 connector cables which attach to the Fixing Driver PCB of a C1 imagepress.
They are 2 seperate cables, and attach to j3306 and j3307 respectively. ...
Happy holidays;
I am looking for a part number for a C1 developer drive gear cluster.
Please see attachment with the arrow. The part number is not listed in the service manual.
Thank you!
You have ruled out the drum, the ITB belt, and the secondary transfer unit...and you say it only does it on heavy stock. What about plain paper...same issue? If not, examine the heavy stock for any...
We have an ipf 9000 throwing the above error. We dont use the unit a lot, however, we do when we need prints wider than 44", so we dont stock a lot of parts for the machine.
The error points to a...
i so love honest people....
thanks for the heads up!
a guy illegally selling copyrighted material shouldnt be calling people names....just saying
Are you using OEM ink, or third party ink?
Teckat....per your suggestion, i changed the pressure pad, pad cover, and fuser belt.
worked perfect...after a run of 500 prints, we can declare case closed!
thanks much!!!!
I have a C1 which is throwing error code e0014-0002, which is a fixing motor issue according to the manual. The error started intermittent, but now occurs every time, on plain paper mode only. ...
After replacing the MC relay board, the printer recognizes the maintenance cartridge. Functionally, the printer works fine. However, the prints are now way off register. Have done all the print...
Need to replace this part...would anyone happen to know the correct part number?
Thanks!
Teckat, when i start in service mode, it doesnt get to the menu screen before it says no MC, which locks it up. I will try re-installing the firmware later today. Perhaps it has been corrupted...
Hi guys;
Have a problem which i need some guidance on. Our ipf9000 is now saying there is no maintenance cartridge loaded....the problem, we just installed a new one. I tried starting it in...
Hello all!
I am hoping to gather information on what your companies service contract rates are. All models are welcome, but am especially interested in the following models:
Canon imagepress...
...May the weather be warm and the drink plentiful! Enjoy!
Good stuff!
Thanks!:cool: